Lexmark C772N Service Manual - Page 39
Unacceptable paper, Selecting paper, registration, Always, Do not, Menus and, Messages Guide
UPC - 734646047227
View all Lexmark C772N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
5061 Unacceptable paper The following papers are not recommended for use with the printer: • Chemically treated papers used to make copies without carbon paper, also known as carbonless papers, carbonless copy paper (CCP), or no carbon required (NCR) paper • Preprinted papers with chemicals that may contaminate the printer • Preprinted papers that can be affected by the temperature in the printer fuser • Preprinted papers that require a registration (the precise print location on the page) greater than ±0.09 in., such as optical character recognition (OCR) forms • In some cases, registration can be adjusted with the software application to successfully print on these forms. • Coated papers (erasable bond), synthetic papers, or thermal papers • Rough-edged, rough or heavily textured surface papers or curled papers • Recycled papers containing more than 25% post-consumer waste that do not meet DIN 19 309 • Paper having a weight less than 60 g/m2 (16 lb) • Multiple-part forms or documents Selecting paper Proper paper loading helps prevent jams and ensures trouble-free printing. To help avoid jams or poor print quality: • Always use new, undamaged paper. • Before loading paper, know the recommended print side of the paper. This information is usually indicated on the paper package. • Do not use paper that has been cut or trimmed by hand. • Do not mix media sizes, weights, or types in the same source; mixing results in jams. • Do not use coated papers unless they are specifically designed for electrophotographic printing. • Do not forget to change the Paper Size setting when using a source that does not support auto size sensing. • Do not remove trays while a job is printing or Busy appears on the operator panel. • Make sure the Paper Type and Paper Weight settings are correct. (See "Paper Menu" in the Menus and Messages Guide on the publications CD for detailed information about these settings.) • Make sure the paper is properly loaded in the source. • Flex paper back and forth. Do not fold or crease the paper. Straighten the edges on a level surface. General information 1-19