Lexmark E238 Service Manual - Page 229
Transport motor cable removal, Remove the LVPS/HVPS card assembly. See
View all Lexmark E238 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 229 highlights
4511-xxx Transport motor cable removal 1. Remove the right cover. See "Right side cover removal" on page 4-12 for more information. 2. Remove the controller card cover. See "Controller card removal" on page 4-15 for more information. 3. Unplug the transport motor cable at J8 on the controller card. 4. Remove the LVPS/HVPS card assembly. See "LVPS/HVPS card assembly removal" on page 4-41 for more information. 5. Extract the cable (A) through the side frame, leaving it free at the opening above the LVPS/HVPS (B). A B 6. Turn the printer over. 7. Remove the fuser. See "Fuser removal" on page 4-28. 8. Extract the cable through the hole and from its retainers behind the fuser. 9. Unplug the cable at the motor. 30 Repair information 4-51
4511-xxx
Repair information
4-51
Transport motor cable removal
1.
Remove the right cover. See
“Right side cover
removal” on page 4-12
for more information.
2.
Remove the controller card cover. See
“Controller
card removal” on page 4-15
for more information.
3.
Unplug the transport motor cable at J8 on the controller card.
4.
Remove the LVPS/HVPS card assembly. See
“LVPS/HVPS card
assembly removal” on page 4-41
for more information.
5.
Extract the cable (A) through the side frame, leaving it free at the
opening above the LVPS/HVPS (B).
6.
Turn the printer over.
7.
Remove the fuser. See
“Fuser removal” on page 4-28
.
8.
Extract the cable through the hole and from its retainers behind the
fuser.
9.
Unplug the cable at the motor. 30
A
B