Lexmark E260 Service Manual - Page 67

Paper jam error codes (200-series) (Continued) 4513-200, -220, -230 Error Description Action 242.01 Took too long to ramp up dc feed motor 242.08 Received lots of dc feed interrupts before losing them 242.10 Second pick attempt failed from Tray 2 Check the connection with Tray 2. (Lift the printer and re-set it on Tray 2.) If the error persists, then replace Tray 2. Remove Tray 2 and inspect for obstruction in the paper path. Check the pick tires for wear or paper dust. Replace if necessary. Check the wear strips and replace if necessary. 242.12 Second pick from manual feeder, tray 1, or feeder failed when media was in the source, other sheets were committed to the paper path. Check the wear strips and replace them if worn. 242.16 Failed to feed from tray 2. Pages in the paper path have been flushed to the output bin. Remove Tray 2 and inspect for obstruction in the paper path. Check the pick tires for wear or paper dust. Replace if necessary. Check the wear strips and replace if necessary. 251.00 251.10 251.11 Paper jam near the manual feeder. Second pick attempt failed from manual feeder. Failed to feed from manual feeder. Pages in the paper path have been flushed to the output bin. Inspect the pick roller on the MPF or the rollers on the manual feed. If the MPF pick roller is damaged or worn, then replace the MPF. For a printer with a manual feed only (no MPF), clean the roller. 251.12 Second pick from manual feeder, tray 1, or feeder failed when media was in the source while the other sheets were committed to the paper path. 251.19 Media never reached the input sensor from the manual feeder. 251.20 The media in the MPF has been pushed in too far. 251.21 The media in the MPF has been pushed in too far. Remove the media, realign the stock, and re-insert. Do not let the top sheets to go beyond the wear strips. Diagnostics information 2-41