Lexmark M1342 Users Guide PDF - Page 27

Set up, install, and configure 27 Using Lexmark Mobile Assistant 1 Depending on your mobile device, download the Lexmark Mobile Assistant app from either Google PlayTM or App Store. 2 From the printer control panel, navigate to: Settings > > Network/Ports > > Wireless > > Setup Using Mobile App > > Printer ID > 3 From your mobile device, launch the app, and then accept the Terms of Use. Note: If necessary, grant permissions. 4 Tap Connect to Printer > Go to Wi‑Fi Settings. 5 Connect your mobile device to the printer wireless network. 6 Return to the app, and then tap Setup Wi-Fi Connection. 7 Select a Wi-Fi network, and then type the network password. 8 Tap Done. Connecting the printer to a wireless network using Wi‑Fi Protected Setup (WPS) Note: This feature is available only in some printer models. Before you begin, make sure that: • The access point (wireless router) is WPS‑certified or WPS‑compatible. For more information, see the documentation that came with your access point. • A wireless network adapter is installed in your printer. For more information, see the instructions that came with the adapter. • Make sure that Active Adapter is set to Auto. From the control panel, navigate to: Settings > > Network/Ports > > Network Overview > > Active Adapter > > Auto > Using the Push Button method 1 From the control panel, navigate to: Settings > > Network/Ports > Button Method > > Wireless > 2 Follow the instructions on the display. > Wi‑Fi Protected Setup > > Start Push Using the personal identification number (PIN) method 1 From the control panel, navigate to: Settings > Method > > Network/Ports > > Wireless > > Wi‑Fi Protected Setup > > Start PIN 2 Copy the eight‑digit WPS PIN. 3 Open a web browser, and then type the IP address of your access point in the address field.