Lexmark M1342 Users Guide PDF - Page 54
Set WEP Key, WPA2-Personal, Set PSK, WPA2/WPA, Personal, 1x Encryption Mode
View all Lexmark M1342 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Use printer menus 54 Menu item Set WEP Key WPA2-Personal AES* Set PSK WPA2/WPA‑Personal AES* 802.1x Encryption Mode WPA+ WPA2* IPv4 Enable DHCP On* Off IPv4 Set Static IP Address IP Address Netmask Gateway IPv6 Enable IPv6 On* Off IPv6 Enable DHCPv6 Off* On IPv6 Stateless Address Autoconfiguration Off On* IPv6 DNS Address IPv6 Manually Assigned IPV6 Description Specify a WEP password for secure wireless connection. Note: This menu item appears only if Wireless Security Mode is set to WEP. Enable wireless security through WPA2. Note: This menu item appears only if Wireless Security Mode is set to WPA2-Personal. Set the password for secure wireless connection. Note: This menu item appears only if Wireless Security Mode is set to WPA2/WPA-Personal or WPA2‑Personal. Enable wireless security through WPA2/WPA. Note: This menu item appears only if Wireless Security Mode is set to WPA2/WPA-Personal. Enable wireless security through 802.1x standard. Note: This menu item appears only if Wireless Security Mode is set to 802.1x - Radius. Enable Dynamic Host Configuration Protocol (DHCP). Note: DHCP is a standard protocol that lets a server dynamically assign an IP address and other network configuration parameters to each device on the network, so that they can communicate with other IP networks. Set the static IP address of your printer. Enable IPv6 in the printer. Enable DHCPv6 in the printer. Set the network adapter to accept the automatic IPv6 address configuration entries provided by a router. Specify the DNS server address. Assign the IPv6 address. Note: This menu item appears only in some printer models.