Lexmark M1342 Users Guide PDF - Page 57
TCP/IP, Network Address, PCL SmartSwitch, Mac Binary PS, Notes, Energy Efficient Ethernet
View all Lexmark M1342 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Use printer menus 57 Menu item Description IPv6 DNS Address Specify the DNS server address. IPv6 Address Prefix 0-128 (64*) Specify the address prefix. IPv6 All IPv6 Addresses Show all IPv6 addresses. IPv6 All IPv6 Router Addresses Show all IPv6 router addresses. Network Address UAA LAA Show the printer Media Access Control (MAC) addresses: Locally Administered Address (LAA) and Universally Administered Address (UAA). Note: You can change the printer LAA manually. PCL SmartSwitch On* Off Set the printer to switch automatically to PCL emulation when a print job requires it, regardless of the default printer language. Note: If PCL SmartSwitch is off, then the printer does not examine incoming data and uses the default printer language specified in the Setup menu. PS SmartSwitch On* Off Set the printer to switch automatically to PS emulation when a print job requires it, regardless of the default printer language. Note: If PS SmartSwitch is off, then the printer does not examine incoming data and uses the default printer language specified in the Setup menu. Mac Binary PS Auto* On Off Set the printer to process Macintosh binary PostScript print jobs. Notes: • On processes raw binary PostScript print jobs. • Off filters print jobs using the standard protocol. Energy Efficient Ethernet Auto* On Off Reduce power consumption when the printer does not receive data from the Ethernet network. Note: An asterisk (*) next to a value indicates the factory default setting. TCP/IP Note: This menu appears only in network printers or printers that are attached to print servers. Menu item Description Set Hostname Set the current TCP/IP host name. Allow DHCP/BOOTP to update NTP server On* Off Allow the DHCP and BOOTP clients to update the NTP settings of the printer. Note: An asterisk (*) next to a value indicates the factory default setting.