Lexmark MS417 User Guide - Page 95
Standard USB menu, Enable IPv6, Auto Configuration, Set Hostname, View Address, View Router Address
View all Lexmark MS417 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Understanding the printer menus 95 Use To Enable IPv6 On Off Enable Internet Protocol Version Six (IPv6) in the printer. IPv6 uses bigger numbers to create IP addresses. Note: On is the factory default setting. Auto Configuration On Off Specify whether or not the network adapter accepts the automatic IPv6 address configuration entries provided by a router. Note: On is the factory default setting. Set Hostname* Set the host name. Note: The host name is limited to 15 characters, and accepts US‑ASCII, alphanumeric characters and hyphen only. View Address* View the current IPv6 addresses. View Router Address* View the current router address. Enable DHCPv6 On Off Enable DHCPv6 in the printer. Note: On is the factory default setting. * These settings can be changed only from the Embedded Web Server. Standard USB menu Use PCL SmartSwitch On Off PS SmartSwitch On Off To Set the printer to automatically switch to PCL emulation when a print job received through a USB port requires it, regardless of the default printer language. Notes: • On is the factory default setting. • When set to Off, the printer does not examine incoming data. The printer uses PostScript emulation if the PS SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if the PS SmartSwitch is set to Off. Set the printer to automatically switch to PS emulation when a print job received through a USB port requires it, regardless of the default printer language. Notes: • On is the factory default setting. • When set to Off, the printer does not examine incoming data. The printer uses PCL emulation if the PCL SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if the PCL SmartSwitch is set to Off.