Lexmark OptraImage SC 1275 Service Manual - Page 51
Lexmark OptraImage SC 1275 Manual
View all Lexmark OptraImage SC 1275 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Attendance Message 54 Serial Option x Error Action A serial interface error has been detected (framing or parity). This error usually indicates the serial link has not been set up correctly. x represents optional serial port 1 through 3. Press and hold Select and then press Return to determine the cause of the host interface error. When the serial error is displayed, the reporting of other serial errors is suppressed until interface parameters are changed or the printer is turned off. Check the interface: • Verify that the correct cable is used. • Make sure the serial interface parameters (protocol, baud, parity, data bits) are correct. • Press Go to clear the message and continue printing the job. The print job may not print correctly. • To reset the printer: • Press to access the Busy menu. • Select Reset Printer. 54 Parallel Error An IEEE 1284 protocol error has been detected on the parallel host interface. This error may be due to a faulty cable. 2-16