Lexmark OptraImage SC 1275 Service Manual - Page 76
Lexmark OptraImage SC 1275 Manual
View all Lexmark OptraImage SC 1275 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Marks on Paper Service Check If you have evenly spaced marks on the paper, measure the distance between the marks and locate the symptom below. Check the assembly for dirt or damage and clean as necessary. Run a test print to verify the problem has been corrected. The indicated assemblies are replaced by the customer at prescribed intervals. Distance between marks FRU 25mm, single color 50mm, single color 51mm, all colors 65.5mm 94mm, light horizontal streaks 95mm, light to dark discoloring 172mm No repeat marks. One mark appears in the same position on each page. Toner cartridge scuff Toner cartridge developer Second transfer roll Fuser lower roller Photoconductor cartridge Image transfer belt assembly, check for debris on the roller under the belt Fuser belt, toner offset indicates a new fuser coating roll is needed Image transfer belt Diagnostic Information 2-41