Lexmark P122 Photo Jetprinter Service Manual - Page 22
Maintenance Station Service Check, When the printer is not in use, it seals the printhead to prevent
View all Lexmark P122 Photo Jetprinter manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
4102-P01 Maintenance Station Service Check The maintenance station has two functions: 1. Cleans the printhead nozzles during the print operation. 2. When the printer is not in use, it seals the printhead to prevent the nozzles from drying. Parts / FRUs Action 1 Maintenance Station Assembly As the carrier moves to the right over the maintenance station, a slot on the bottom of the carrier engages a tab on the sled of the maintenance station causing the cap to rise and seal the printhead. Carrier movement to the left will uncap the printhead. The wiper cleans the printhead nozzles as the carrier leaves the maintenance station. The wiper cleans the printhead only when the carrier is moving to the left. There should be no wiping action of the printhead nozzles when the carrier is moving to the right. After the cleaning operation is complete, a tab on the maintenance station engages a tab on the carrier, causing the wiper to lower. 2 Wiper 3 Cap Check the maintenance station for worn or broken parts. A worn wiper causes degraded print quality just after a maintenance cleaning. Check for loose or worn wiper. A worn cap causes the printhead nozzles to dry and clog. Check for loose or worn cap. 2-6 Service Manual