Lexmark P122 Photo Jetprinter Service Manual - Page 24

Paper Feed Service Check, Parts / FRUs, Action

Get Lexmark P122 Photo Jetprinter PDF manuals and user guides View all Lexmark P122 Photo Jetprinter manuals
Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

4102-P01 Paper Feed Service Check If your printer does not have paper jams, continue with this service check. If your printer does have a paper jam, examine it for the following before you begin the service check: • Check the entire paper path for obstructions. • Be sure not to overfill the sheet feeder. • Be sure the correct type of paper is being used. • Check for static in the paper. Parts / FRUs 1 System Board Action Check for approximately +17 V dc pulse between paper feed connector J3F-4 and ground, on the system board as the paper feed motor is running during the POST sequence. If the voltage is incorrect, replace the system board. If correct, check for motor pins shorted to the motor housing. If you find a shorted pin, replace the engine frame assembly. 2-8 Service Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
2-8
Service Manual
4102-P01
Paper Feed Service Check
If your printer does not have paper jams, continue with this service
check. If your printer does have a paper jam, examine it for the
following before you begin the service check:
•
Check the entire paper path for obstructions.
•
Be sure not to overfill the sheet feeder.
•
Be sure the correct type of paper is being used.
•
Check for static in the paper.
Parts / FRUs
Action
1
System Board
Check for approximately +17 V dc pulse between
paper feed connector J3F-4 and ground, on the
system board as the paper feed motor is running
during the POST sequence. If the voltage is
incorrect, replace the system board. If correct,
check for motor pins shorted to the motor housing.
If you find a shorted pin, replace the engine frame
assembly.