Lexmark T430 User's Guide - Page 110
PPDS Font Error, Defective Flash, Flash Full, Unformatted Flash, Std Network Software, Error
View all Lexmark T430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Understanding the printer messages Message What this message means What you can do 50 PPDS Font Error The PPDS interpreter has encountered a font error or the printer has received invalid PPDS download font data. • Press Go to clear the message and continue printing. • Press Menu to open the Job Menu and cancel the job or reset the printer. 51 Defective Flash The printer detects defective flash memory. Press Go to clear the message and continue printing. You must install different flash memory before you can download any resources to flash. 52 Flash Full There is not enough free space in the flash memory to store the data you are trying to download. • Press Go to clear the message and continue printing. Downloaded fonts and macros not previously stored in flash memory are deleted. • Delete fonts, macros, and other data stored on the flash memory. • Install flash memory with more storage capacity. 53 Unformatted Flash The printer detects unformatted flash memory. • Press Go to clear the message and continue printing. You must format the flash memory before you can store any resources on it. • If the error message remains, the flash memory may be defective and require replacing. 54 Std Network Software The printer cannot establish Error communications with an installed network port. • Press Go to clear the message and continue printing. The job may not print correctly. • Program new firmware for the network interface by way of the parallel port. • Press Menu to open the Job Menu and reset the printer. 55 Unsupported Flash in Slot X The printer detects an unsupported flash memory card in one of the connectors. Turn the printer off. Remove the unsupported option card. 56 Std Parallel Port Disabled Data has been sent to the printer through a parallel port, but the parallel port is disabled. • Press Go to clear the message. The printer discards any data received through the parallel port. • Make sure the Parallel Buffer menu item in the Parallel Menu is not set to Disabled. See also: Parallel Buffer Understanding the printer messages 110