Lexmark X5340 User's Guide - Page 137
Settings are not saved, Checking printer readiness, Windows XP users only
UPC - 734646275804
View all Lexmark X5340 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
Windows XP users only 1 Click Start Settings Printers and Faxes. 2 Make sure: • The printer icon does not say Paused. If the printer is paused, right-click the icon, and then click Resume Printing. • The printer icon says Ready. If it says Offline, right-click the icon, and then click Use Printer Online. • The printer icon has a check mark indicating that the printer is set as the default printer. If it is not, right-click the icon, and then click Set as Default. Windows 2000 users only 1 Click Start Settings Printers. 2 Right-click the Lexmark 5300 Series icon. 3 Make sure: • Set as Default Printer is selected. • Pause Printing is not selected. • Use Printer Offline is not selected. Settings are not saved These are possible solutions. Try one or more of the following: CHANGE TIME-OUT SETTINGS If you press to select a setting, an * appears next to the selected setting. The printer reverts to the default setting after two minutes of inactivity or if the printer is turned off. SAVE SETTINGS If you press to select a setting, an * appears next to the selected setting. Checking printer readiness The printer may not be ready to print. Check the following. When you think you have solved the problem, test the solution by sending a document to print. DOES THE PRINTER HAVE PAPER, AND IS IT PROPERLY LOADED? For more information, see "Loading paper". ARE THE STICKER AND TAPE REMOVED FROM THE PRINT CARTRIDGES? 1 Lift the scanner unit. 2 Remove the print cartridges from the print cartridge carrier. 3 Make sure the sticker and tape are removed from the bottom and back of the cartridges. Troubleshooting 137