Lexmark X546 User Guide - Page 170

Understanding printer messages 170 USB drive disabled A USB drive was inserted into the printer, and the port is disabled. Contact your system support person. Use camera controls to print A recognized PictBridge‑compatible camera is attached to the printer. Waiting The printer has received data to print, but is waiting for an End‑of‑Job command, a Form Feed command, or additional data. Try one or more of the following: • Press to print the contents of the buffer. • Cancel the current print job. Waiting, too many events Wait for the message to clear. Warning-Potential Damage: Do not turn the printer off while this message appears on the display. 30.yy cartridge missing Insert the missing toner cartridge to clear the message and continue printing. 31.yy Defective Cartridge Replace the defective toner cartridge with a new one. 31 Defective Imaging Kit Replace the imaging kit. 32.yy Replace Unsupported Cartridge Replace the unsupported toner cartridge with a supported one. 34 Short paper The printer paper size setting did not match the length of the paper that entered the printer. Try one or more of the following: • Press to clear the message and continue printing. • Press , and then press to cancel printing. • Make sure the paper size setting matches the size of the paper in the tray.