Lexmark X738de User's Guide - Page 164
Network Card menu, IPv6 menu, Network/Ports, Standard Network, Network <x>, Std Network Setup
View all Lexmark X738de manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
Menu item AutoIP Yes No Enable FTP/TFTP Yes No Enable HTTP Server Yes No WINS Server Address DNS Server Address Description Specifies the Zero Configuration Networking setting Note: Yes is the factory default setting. Enables the built-in FTP server, which allows you to send files to the printer using the File Transfer Protocol. Note: Yes is the factory default setting. Enables the built-in web server (Embedded Web Server). When enabled, the printer can be monitored and managed remotely using a web browser. Note: Yes is the factory default setting. Lets you view or change the current WINS Server Address Lets you view or change the current DNS Server Address Network Card menu This menu is available from the Network/Ports menu: Network/Ports Standard Network or Network Std Network Setup or Net Setup Network Card Menu item View Card Status Connected Disconnected View Card Speed Network Address UAA LAA Job Timeout 0-225 seconds Banner Page Off On Description Lets you view the connection status of the Network Card Lets you view the speed of a currently active network card Lets you view the network addresses Sets the amount of time in seconds that a network print job can take before it is canceled Notes: • 90 seconds is the factory default setting. • A setting value of 0 disables the timeout. • If a value of 1-9 is selected, then the setting is saved as 10. Allows the printer to print a banner page. Note: Off is the factory default setting. IPv6 menu Use the following menu items to view or set the Internet Protocol version 6 (IPv6) information. Note: This menu is available only for network models or printers attached to print servers. This menu is available from the Network/Ports menu: Understanding printer menus 164