Lexmark XC9325 Users Guide - Page 190
Out of Service Erase, Scanner Configuration
View all Lexmark XC9325 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 190 highlights
Use printer menus 190 Menu item Description Scanner Configuration Scanner Manual Registration Front ADF Registration Rear ADF Registration Flatbed Registration Manually register the flatbed and ADF after replacing the ADF, scanner glass, or controller board. Scanner Configuration Reset Maintenance Counter Reset the counter after replacing the ADF maintenance kit. Scanner Configuration Edge Erase Flatbed Edge Erase (3*) ADF Edge Erase (3*) Set the size, in millimeters, of the no‑print area around an ADF or flatbed scan job. Scanner Configuration Disable Scanner No* Yes ADF Only Disable the scanner when it is not working properly. Scanner Configuration Tiff Byte Order CPU Endianness* Little Endian Big Endian Set the byte order of a TIFF‑formatted scan output. Scanner Configuration Exact Tiff Rows Per Strip On* Off Set the RowsPerStrip tag value of a TIFF‑formatted scan output. Note: An asterisk (*) next to a value indicates the factory default setting. Out of Service Erase Menu item Out of Service Erase Memory Last Sanitized Hard Disk Last Sanitized ISD last erased Description Show a read‑only information on when the printer memory or storage drive was last erased. Note: Hard Disk Last Sanitized appears only when a hard disk is installed.