Lexmark XC9325 Users Guide - Page 205

Use printer menus 205 Menu item Description Print Page Borders Off* On Place a border around each image when printing multiple pages on a single page. Collate Off [1,1,1,2,2,2] On [1,2,1,2,1,2]* Print multiple copies in sequence. Offset Pages None* Between Copies Between Jobs Offset the output of each print job or each copy of a print job. Notes: • Between Copies offsets each copy of a print job if Collate is set to On [1,2,1,2,1,2]. If Collate is set to Off [1,1,1,2,2,2], then each set of printed pages is offset, such as all page 1s and all page 2s. • Between Jobs sets the same offset position for the entire print job regardless of the number of copies printed. • This menu item appears only when a staple, hole punch finisher is installed. Staple Off* 1 staple, top left corner 2 staples, left 1 staple, top right corner 2 staples, top 1 staple, bottom left corner 2 staples, bottom 1 staple, bottom right corner 2 staples, right 4 staples Specify the staple position for all print jobs. Note: This menu item appears only when a finisher is installed. Punch Off* 2 holes 3 holes 4 holes Punch holes on the printed output. Note: This menu item appears only when a staple, hole punch finisher is installed. "Copy from" Size [List of paper sizes] Set the paper size of the original document. Note: Letter is the U.S. factory default setting. A4 is the international factory default setting. "Copy to" Source Tray [x] (1*) Multipurpose Feeder Auto Size Match Specify the paper source for the copy job. Temperature ‑4 to 4 (0*) Specify whether to generate a cooler or warmer output. Note: An asterisk (*) next to a value indicates the factory default setting.