Lexmark lexmark J110 AppleTalk Guide - Page 10
Error conditions
![]() |
View all Lexmark lexmark J110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Printing Print materials Supplies Troubleshooting Administration AppleTalk and MarkNet print servers 10 Error conditions What shows on the four indicator lights Description binary 12 (for 0.25 sec), Serious failure. binary 3 (for 0.25 sec), The print server is repeat continuously. unable to recover. binary 15 (for 0.25 sec), POST error binary x (for 0.25 sec), repeat continuously. where x could be 0, 1, 2, 3, 4, 5, 6, 7, 8, or 9 Cause and solution Flawed firmware in print server or power interruption during flash operation. Call Customer Support. Power-on self test error. During start-up, a hardware failure was detected on the print server. 1 Reset the print server. 2 If the problem reoccurs, call Customer Support. www.lexmark.com Lexmark J110
![](/manual_guide/products/lexmark-lexmark-j110-appletalk-guide-c896fca/10.png)