Lexmark lexmark J110 AppleTalk Guide - Page 11
Administration
![]() |
View all Lexmark lexmark J110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Printing Print materials Supplies Troubleshooting Administration AppleTalk and MarkNet print servers 11 What shows on the four indicator lights binary 9 (for 0.75 sec), binary 1 (for 0.75 sec), repeat continuously. Description Serial error Type = Parity Cause and solution Parity error occurred during serial print job. 1 Reset the print server. (The 9,1 error code does not go away until you reset the print server. This is to make sure you see that a parity error occurred. To turn parity checking off, use a utility or telnet to port 9000.) 2 Send the job again. www.lexmark.com Lexmark J110
![](/manual_guide/products/lexmark-lexmark-j110-appletalk-guide-c896fca/11.png)
AppleTalk and MarkNet print servers
Print materials
Supplies
Troubleshooting
Administration
11
Printing
www.lexmark.com
Lexmark J110
binary
9
(for 0.75 sec),
binary
1
(for 0.75 sec),
repeat continuously.
Serial error
Type = Parity
Parity error occurred during serial print job.
1
Reset the print server. (The 9,1 error code
does not go away until you reset the print
server. This is to make sure you see that a
parity error occurred. To turn parity
checking off, use a utility or telnet to port
9000.)
2
Send the job again.
What shows on the
four indicator lights
Description
Cause and solution