LiftMaster MEGA SLIDE-X MEGA SLIDE-X MSLXDCBB Manual - Page 3

INTRODUCTION CARTON INVENTORY Before beginning your installation check that all components were provided and received undamaged. Refer to list below for factory provided parts. Description Qty. Operator 1 Accessory Shelf 1 Owner's Manual 1 Gate Pull Tabs with Hardware 2 (MS205 Pull Tabs, MS204 Chain Bolt) 20' (6.1 m) of #41 Nickel Plated Drive Chain 1 (10' (3.05 m) coils, 2 required MS202) Warning Signs 2 Sealed 12 Vdc, 7AH Batteries 2 MANUAL RELEASE The MANUAL RELEASE switch is located on the left side of the gate operator frame towards the chain. To operate the gate manually, place the MANUAL RELEASE switch in the down position. This will remove power to the motor allowing the gate to be manually opened. NorFmlipasl wOitpcehrauptiofonr Posniotiromnal operation. MaFlnipuaswl Ritcehledaoswen to Podsisiteionngage power to motor and for manual operation. 3