LiftMaster SW425 SW425 Manual - Page 3

Operator Dimesions And Specifications, Battery Run Only Optional

Page 3 highlights

OPERATOR DIMENSIONS AND SPECIFICATIONS MODEL SW425 OPERATOR DIMENSIONS • Height: 16-1/2" (41.9 cm) • Width: 14-1/2" (36.8 cm) • Depth: 13-1/2" (34.3 cm) SHIPPING WEIGHT • Operator: 53 lbs. (24 kg) • Hardware Package: 12 lbs. (5.4 kg) • Mounting Posts: 16 lbs. (7.3 kg) Total: 83 lbs. (37.7 kg) Options: Operator and Battery Run Package: 59 lbs. (26.8 kg) Low Voltage Cable: 1 lb./10 ft. (.5 kg/3.1 m) Concrete Mounting Stand: 17 lbs. (7.7 kg) 16-1/2" APPLICATIONS (41.9 cm) • Maximum Gate Weight: 300 lbs. (136.1 kg) • Maximum Gate Length: 13 ft. (4 m) POWER REQUIREMENTS Dedicated 115 Vac (+/- 10V), 5A Power Circuit NOTE: For standard operator, place 115Vac at or near the operator. For battery run operator, place 115Vac within 1000' (304.8 m) of the operator. 13-1/2" (34.3 cm) There are three possibilities for supplying power to the SW425 gate operator: • The standard power supply version is made to connect directly to 115 Volt, 5 Amp power source and is available for full systems capability models. This power supply must be at or near the gate operator location. Because of the low current draw, 115 Volt power may be run as far as 1000' (304.8 m) with 12 gauge wire from the main breaker panel and can be run much farther with larger wire. • Supply power to the operator with the low voltage battery run version of the SW425. To supply power to the SW425 Battery Run, wire as small as 16 gauge can be run as far as 300' (91.4 m) from a charger that is plugged in remotely. Because the power is low 12Vdc, the wire can be direct burial wire which eliminates the need for expensive conduit runs. 20-3/4" (52.7 cm) • Supply power to the SW425 with the solar power version of the operator. The Solar model does not require any power to be run because the operator and solar power supply are self contained. The panel may be placed several hundred feet from the operator if this is necessary to achieve maximum sunlight conditions. 14-1/2" (36.8 cm) INCLUDED WITH OPERATOR: Check package to make sure it contains the following items. STANDARD GATE OPERATOR BATTERY RUN ONLY (OPTIONAL) • 1-Model SW425 Gate Operator • 1-Burial Cable, 10' • 2-Mounting Posts 2" Dia. x 36" • 1-Charger, 12Vac • 1-Gate Bracket • 1-Battery, 12Vac • 2-Swivel Joints • 2-Sections, Pipe Arm • 1-Primary Arm • 2-Safety Warning Placards SOLAR ONLY (OPTIONAL) • 3-Pipe Sections, 1" x 24" • 2-Pipe Couplings, 1" • 1-Solar Panel Assembly • 5-Lock Rings • 2-Batteries, 12 Vac (See parts identification) 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

3
MODEL SW425
OPERATOR DIMENSIONS
• Height:
16-1/2" (41.9
cm)
• Width:
14-1/2" (36.8 cm)
• Depth:
13-1/2" (34.3 cm)
SHIPPING WEIGHT
• Operator:
53 lbs. (24 kg)
• Hardware Package:
12 lbs. (5.4 kg)
• Mounting Posts:
16 lbs. (7.3 kg)
Total: 83 lbs. (37.7 kg)
Options: Operator and Battery Run Package:
59 lbs. (26.8 kg)
Low Voltage Cable:
1 lb./10 ft. (.5 kg/3.1 m)
Concrete Mounting Stand:
17 lbs. (7.7 kg)
APPLICATIONS
• Maximum Gate Weight:
300 lbs. (136.1 kg)
• Maximum Gate Length:
13 ft. (4 m)
POWER REQUIREMENTS
Dedicated 115 Vac (+/– 10V), 5A Power Circuit
NOTE:
For standard operator, place 115Vac at or near the
operator. For battery run operator, place 115Vac
within 1000' (304.8 m) of the operator.
There are three possibilities for supplying power to the
SW425 gate operator:
• The standard power supply version is made to connect
directly to 115 Volt, 5 Amp power source and is available
for full systems capability models. This power supply must
be at or near the gate operator location. Because of the low
current draw, 115 Volt power may be run as far as 1000'
(304.8 m) with 12 gauge wire from the main breaker panel
and can be run much farther with larger wire.
• Supply power to the operator with the low voltage battery
run version of the SW425. To supply power to the SW425
Battery Run, wire as small as 16 gauge can be run as far
as 300' (91.4 m) from a charger that is plugged in
remotely. Because the power is low 12Vdc, the wire can be
direct burial wire which eliminates the need for expensive
conduit runs.
• Supply power to the SW425 with the solar power version
of the operator. The Solar model does not require any
power to be run because the operator and solar power
supply are self contained. The panel may be placed several
hundred feet from the operator if this is necessary to
achieve maximum sunlight conditions.
INCLUDED WITH OPERATOR: Check package to make sure
it contains the following items.
STANDARD GATE OPERATOR
• 1-Model SW425 Gate Operator
• 2-Mounting Posts 2" Dia. x 36"
• 1-Gate Bracket
• 2-Swivel Joints
• 2-Sections, Pipe Arm
• 1-Primary Arm
• 2-Safety Warning Placards
OPERATOR DIMENSIONS AND SPECIFICATIONS
16-1/2
"
(41.9 cm)
13-1/2
" (34.3 cm)
20-3/4
"
(52.7 cm)
14-1/2
" (36.8 cm)
BATTERY RUN ONLY (OPTIONAL)
• 1-Burial Cable, 10'
• 1-Charger, 12Vac
• 1-Battery, 12Vac
SOLAR ONLY (OPTIONAL)
• 3-Pipe Sections, 1" x 24"
• 2-Pipe Couplings, 1"
• 1-Solar Panel Assembly
• 5-Lock Rings
• 2-Batteries, 12 Vac
(See parts identification)