Linksys WVC54GCA-RM User Guide - Page 11
Placement Options
UPC - 745883582280
View all Linksys WVC54GCA-RM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Chapter 3 Placement Options The Camera can stand on a surface or be mounted on a wall. Depending on the positioning you want, you attach the Camera head to its stand at two different points. Stand Option Follow these steps to stand the Camera on a surface. 1. Insert the screw end of the stand into the hole on the bottom panel. 2. Tighten the screw and then the thumbscrew. 3. Place the Camera, and adjust the tilt of its head accordingly, as described below in section "Camera Head Tilting". Setting Up and Mounting the Camera 5. Adjust the tilt of its head accordingly, as described below in section "Camera Head Tilting". Hole for Attaching Stand (Wall-Mount Option) Wall Mount Option Thumbscrew (tightened) Camera in Standing Position Wall Mount Option You use the Camera's stand to mount the Camera on a wall. The stand has two wall-mount slots that are spaced 58 mm (2.28 inches) apart. 1. Insert the screw end of the stand into the hole on the back panel. 2. Tighten the screw end and then the thumbscrew. 3. Determine where you want to mount the Camera. Attach two screws to the wall, so that the Camera's wall-mount slots line up with the two screws. 4. Maneuver the Camera so the screws are inserted into the two slots. Wireless-G Internet Home Monitoring Camera Camera in Wall-Mounting Position (side view) 58 mm (2.28 inches) Wall-Mount Slots 10