Linksys WVC54GCA-RM User Guide - Page 26

Chapter 5 Advanced Configuration with the Web-based Utility To upgrade the firmware: 1. Go to www.linksys.com, and download the firmware upgrade file for the Camera. Then extract the file. 2. From the Setup > Administration screen, click Upgrade Firmware. 3. You will see the Upgrade Firmware screen. Click Browse to find the extracted file, and then double-click it. 4. Click Start Upgrade, and follow the on-screen instructions. To cancel the upgrade, click Cancel. Setup > Users The Setup > Users screen lets you specify which Camera users are allowed to view the Camera's video. Other operations: •• Clear While editing a user's information, click Clear to clear the User Name, Password, and Confirm Password fields and start over. •• Delete To delete a user's record from the database, select the user from the list, then click Delete. •• Delete All To clear the database, click Delete All, then click OK to confirm. To save your changes, click Apply. To cancel any unsaved changes, click Cancel. To get additional information about the screen's features, click Help. Setup > Options The Setup > Options screen allows you to set up and configure DDNS Service, UPnP configuration, and Alternate Port settings. DDNS (Dynamic Domain Name System) lets you assign a fixed host and domain name to a dynamic Internet IP address. Setup > Users Screen Users Settings Use this to assign access rights to the Camera's users. Allow access by Select how access is to be granted, either All users or Only users in database. If you select Only users in database, edit the user database as needed, as described below. Users This lists the user database (the users who have access to the Camera). Editing the Database To add a user to the database: 1. Enter the user's name in the User Name field. 2. Enter the password in the Password and Confirm Password fields. 3. Click Add User to save the user in the database. To edit a user's record in the database: 1. Select the user from the Users list, then click Edit. 2. Edit the User Name and/or Password as needed. 3. Click Add User to save the updated information. Wireless-G Internet Home Monitoring Camera Setup > Options Screen DDNS Enable DDNS Select this option to enable DDNS service with the Camera. Service Provider This is the DDNS service provider, which is preset to TZO. Domain Name Enter the domain name assigned to you by your DDNS service provider. E-Mail Address Enter the E-mail address used to register the DDNS service. TZO Key Enter the TZO key provided by your DDNS service provider. Update Period Use this to set the schedule for checking whether the Internet IP address has been changed. Specify how often to check, from Every 10 mins to Every 24 hrs, as well as the time to start checking, in hh:mm format. 25