Linksys WVC54GCA-RM User Guide - Page 25
Mobile Settings, Video Adjustments, Options, Login, Restore Factory Defaults, Firmware Upgrade
UPC - 745883582280
View all Linksys WVC54GCA-RM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Chapter 5 Advanced Configuration with the Web-based Utility Estimated Bit Rates for Video Viewing or Recording Resolution Quality Level Bit Rate in kbps 640 x 480 Very High 4000 640 x 480 High 3200 640 x 480 Normal 1200 640 x 480 Low 480 640 x 480 Very Low 160 320 x 240 Very High 1000 320 x 240 High 800 320 x 240 Normal 300 320 x 240 Low 120 320 x 240 Very Low 40 160 x 128 Very High 800 160 x 128 High 400 160 x 128 Normal 200 160 x 128 Low 100 160 x 128 Very Low 40 Mobile Settings Enable Mobile Streaming Select this option to enable video streaming to a mobile device. Video Adjustments Power Line Frequency Select the power line frequency (50Hz or 60Hz) used in your region, to improve the picture quality under fluorescent lighting. White Balance Select the desired option to match the current environment and lighting. Brightness If necessary, you can adjust the brightness to obtain a better image. For example, if the camera is facing a bright light, the image may be too dark. In this case, you can increase the brightness. You can select a Brightness value between -3 and 3. Sharpness Select the desired option for the sharpness. You can select a Sharpness value between -3 and 3. Options Enable Microphone Select this to enable audio. Using Audio increases the bandwidth requirements slightly. Enable Time Stamp Select this to display a time stamp on the video. Enable Text Display To display text on the video, select this, then enter up to 20 characters in the field. To save your changes, click Apply. To cancel any unsaved changes, click Cancel. To get additional information about the screen's features, click Help. Wireless-G Internet Home Monitoring Camera Setup > Administration The Setup > Administration screen allows you to change the Camera's login name and password, reset the factory defaults, upgrade the firmware, and set the language. Setup > Administration Screen Login These fields are used to change the login name and password used to access the Camera. For security purposes, you should change these from the default values (both set to admin). Login Name Enter the login name for the Camera. Password Enter the password for the Camera. Verify Password Re-enter the password to verify. Restore Factory Defaults Restore Defaults To restore the Camera to its factory default settings, click Restore Defaults. NOTE: This will overwrite the Camera's settings with the factory defaults. Any changes you made to the Camera's settings will be lost; you will not be able to recover them. Firmware Upgrade Upgrade Firmware New firmware versions are posted at www.linksys.com and can be downloaded for free. If the Camera is functioning satisfactorily, there is no need to download a newer firmware version, unless that version has a new feature that you want to use. Loading new firmware onto the Camera does not always enhance its performance. Linksys recommends that you upgrade the Camera's firmware within your network; in other words, use a computer within the Camera's local network. If you attempt to upgrade the Camera's firmware from a remote location-using a computer outside of the Camera's local network-the upgrade will fail. 24