Logitech HD Powerline 200a Powerline Network Utility Help File - Page 12
PowerLine Network Utility overview and field descriptions, Main Screen overview
![]() |
View all Logitech HD Powerline 200a manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Powerline Network Utility NA200 Glossary PowerLine Network Utility overview and field descriptions Main Screen overview When you open the Powerline Network Utility software, the Main screen displays. Screen Definitions Connected Powerline Device(s) Coordinating Network Adapter Powerline Devices Detected TEI Device PWD MAC Address Bridged MAC Address Rate (Mbps) Enter Device PWD Add Device Scan Set ALL Devices Close Cancel MAC Address for the local network device (connected to the same router as the PC). The master controller for your powerline network. It determines which powerline devices will be allowed access to your network. (This could be any powerline device in your network, and is usually the first one powered up.) Lists the number of powerline devices recognized by the Powerline utility software Terminal Equipment Identifier number The 16-character PWD of an HD Powerline Network Adapter The MAC Address of the network adapter The MAC address for the device the powerline network adapter is connected to (Logitech Alert camera, Squeezebox, X-Box, laptop, etc.) The maximum data transmission speed between the local node and each remote device. Opens a screen that allows you to record the 16-character PWD of a device and have the Powerline Utility save that PWD for identification and easy password changes. . Opens a screen that allows you to enter or edit the network password for your powerline network and enter the 16-character PWD listed on the label of the HD powerline network adapter. Searches for all devices on the powerline network. You can click the Scan button to have the powerline utility update the list of devices that are active and authorized to be on your powerline network. Sets the password for all powerline network devices for which a PWD has been entered on the Main Tab. Do NOT use this button if you are using a Logitech Alert camera system. Exit the Logitech Powerline Network Utility Back out of a setting that you have just entered.
![](/manual_guide/products/logitech-hd-powerline-200a-powerline-network-utility-help-file-fd572cc/12.png)