Logitech HD Powerline 200a Powerline Network Utility Help File - Page 6

Case 2: Add Logitech Alert to secured network, Before Starting

Get Logitech HD Powerline 200a PDF manuals and user guides View all Logitech HD Powerline 200a manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

Powerline Network Utility NA200 3. In the Powerline Network Password field, enter the password you have chosen for your powerline network. Be sure you enter the exact same password you've used already. This will be used for the network password for the specified powerline network adapter. All of the powerline network adapters with the same network password will be on the same network. 4. In the Device PWD field, enter the PWD from the label of that network adapter. The PWD is case-sensitive and dashes between each set of four characters are required. 5. Click OK. The new network adapter now shows up in the device list on the main page. Two MAC addresses are shown. The first is for the powerline device itself, and the next column is the MAC address for the device that is connected to your network through the powerline adapter (i.e. Logitech Revue, laptop, x-box, etc.) 6. Repeat steps 1-4 of the Setting the local network security password. Case 2: Add Logitech Alert to secured network I have a HomePlug system set up like #1 (no Logitech Alert camera system), but it's secured with a password. I've just bought a Logitech Alert Video Security System and want to get the cameras working together with the network that is connected to my PC. Before Starting 1. Write down the 16-character PWD from each powerline device you wish to add to your existing powerline network (the devices that are not part of the Logitech Alert camera system). On Logitech powerline products the PWD is found on the label on the device between the PID and MAC addresses. 2. Leave all of the parts of the Logitech Alert system unplugged until indicated in the following steps.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
Powerline Network Utility NA200
3.
In the Powerline Network Password field, enter the password you have chosen for your
powerline network.
Be sure you enter the exact same password you’ve used already. This will
be used for the network password for the specified powerline network adapter. All of the
powerline network adapters with the same network password will be on the same network.
4.
In the Device PWD field, enter the PWD from the label of that network adapter.
The PWD is
case-sensitive and dashes between each set of four characters are required.
5.
Click OK.
The new network adapter now shows up in the device list on the main page.
Two MAC
addresses are shown.
The first is for the powerline device itself, and the next column is the MAC
address for the device that is connected to your network through the powerline adapter (i.e.
Logitech Revue, laptop, x-box, etc.)
6.
Repeat steps 1-4 of the Setting the local network security password.
Case 2: Add Logitech Alert to secured network
I have a HomePlug system set up like #1 (no Logitech Alert camera system), but it's secured with a
password.
I've just bought a Logitech Alert Video Security System and want to get the cameras
working together with the network that is connected to my PC.
Before Starting
1.
Write down the 16-character PWD from each powerline device you wish to add to your existing
powerline network (the devices that are not part of the Logitech Alert camera system).
On
Logitech powerline products the PWD is found on the label on the device between the PID and
MAC addresses.
2.
Leave all of the parts of the Logitech Alert system unplugged until indicated in the following
steps.