Lowrance HDS-7 LIVE HDS Live Installation Manual - Page 17

U-bracket mounting, Panel mounting, Mark the screw locations using the bracket as a template,

Page 17 highlights

U-bracket mounting 1. Place the bracket in the desired mounting location. Ensure that the chosen location has enough height to accommodate the unit fitted in the bracket, and allows tilting of the unit. Also adequate space is required on both sides to allow tightening and loosening of the knobs. 2. Mark the screw locations using the bracket as a template, and drill pilot holes. Use fasteners suited to the mounting surface material. 3. Screw down the bracket. 4. Mount the unit to the bracket using the knobs. Hand tighten only. 3 4 Panel mounting Refer to the separate mounting template for panel mounting instructions. Installation | HDS Live Installation Manual 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70

U-bracket mounting
1.
Place the bracket in the desired mounting location. Ensure that
the chosen location has enough height to accommodate the
unit fitted in the bracket, and allows tilting of the unit. Also
adequate space is required on both sides to allow tightening
and loosening of the knobs.
2.
Mark the screw locations using the bracket as a template, and
drill pilot holes. Use fasteners suited to the mounting surface
material.
3.
Screw down the bracket.
4.
Mount the unit to the bracket using the knobs. Hand tighten
only.
3
4
Panel mounting
Refer to the separate mounting template for panel mounting
instructions.
Installation
| HDS Live Installation Manual
17