Lowrance HDS-7 LIVE HDS Live Installation Manual - Page 25
Ethernet device connection, Ethernet connector details
View all Lowrance HDS-7 LIVE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
installation such that the load/current draw on each side of the power node is equal. Ú Note: 1 LEN (Load Equivalency Number) equals 50 mA current draw. Ú Note: Do not connect the NMEA 2000 power cable to the same terminals as the engine start batteries, autopilot computer, bow thruster or other high current devices. Ethernet device connection Connection of network devices can be made directly to the Ethernet port, or via a network expansion device to the Ethernet port. Ethernet connector details 4 5 3 2 1 Unit socket (female) Pin Purpose 1 Transmit positive TX+ 2 Transmit negative TX- Wiring | HDS Live Installation Manual 25
installation such that the load/current draw on each side of the
power node is equal.
Ú
Note:
1 LEN (Load Equivalency Number) equals 50 mA current
draw.
Ú
Note:
Do not connect the NMEA 2000 power cable to the same
terminals as the engine start batteries, autopilot computer, bow
thruster or other high current devices.
Ethernet device connection
Connection of network devices can be made directly to the
Ethernet port, or via a network expansion device to the Ethernet
port.
Ethernet connector details
1
2
3
4
5
Unit socket
(female)
Pin
Purpose
1
Transmit positive TX+
2
Transmit negative TX-
Wiring
| HDS Live Installation Manual
25