Lowrance HDS-9 Gen2 Touch Operation Manual - Page 39

6 Navigating The navigation function included in your unit allows you to navigate towards the cursor position, a waypoint or along a predefined route. For information about positioning waypoints and creating routes, refer to "Waypoints, routes & trails" on page 32. Goto cursor You can navigate to the cursor from the chart, radar, sonar or structure pages by activating the cursor and tapping Goto cursor on the menu. ¼¼ Note: The Goto cursor option will only be available when the cursor is active on a page. Navigating on the chart Navigate a route You can start navigating a route by tapping the route and then tapping Navigate on the menu. Routes can be navigated forward, from the first routepoint to the last routepoint, or in reverse starting with the last routepoint and finishing with the first routepoint. When navigating a route, the active route leg will be colored red. The red arrow on the route leg shows the selected navigation method (forward or reverse) you are using to navigate the route. Upcoming route legs are colored orange. Navigating | Lowrance HDS Gen2 Touch | 37