MSI Z170A SLI User Manual - Page 45
Device Mode [STD Printer Mode], Serial COM Port 0 Settings [Auto]
View all MSI Z170A SLI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
fUSB Speed Optimization [Auto] Enables or Disables the USB speed optimization. If set to Auto, BIOS will optimize the USB speed automatically. f Super IO Configuration Sets system Super I/O chip parameters including LPT and COM ports. Press Enter to enter the sub-menu. fSerial (COM) Port 0 Configuration Sets detailed configuration of serial(COM) port x. Press Enter to enter the submenu. fSerial (COM) Port 0 [Enabled] Enables or disables serial (COM) port x. fSerial (COM) Port 0 Settings [Auto] Sets serial port x (COM). If set to Auto, BIOS will optimize the IRQ automatically or you can set it manually. fParallel (LPT) Port Configuration Sets detailed configuration of parallel port (LPT). Press Enter to enter the submenu. fParallel (LPT) Port [Enabled] Enables or disables parallel(LPT) port. fParallel (LPT) Port Settings [Auto] Sets parallel port (LPT). If set to Auto, BIOS will optimize the IRQ automatically or you can set it manually. fDevice Mode [STD Printer Mode] Selects an operating mode for parallel port. [STD Printer Mode] Printer port mode [SPP] Standard Parallel Port mode [EPP-1.9/ 1.7 + SPP] Enhanced Parallel Port-1.9/ 1.7 mode + Standard Parallel Port mode. [ECP] Extended Capability Port mode [ECP + EPP-1.9/ 1.7] Extended Capability Port mode + Enhanced Parallel Port-1.9/ 1.7 mode. f Power Management Setup Sets system Power Management of EuP2013 and AC Power Loss behaviors. Press Enter to enter the sub-menu. fEuP 2013 [Disabled] Enables or disables the system power consumption according to EuP2013 regulation. [Enabled] Optimize the system power consumption according to EuP 2013 regulation. It will not support S4 & S5 wake up by USB and PCIe devices. [Disabled] Disables this function. BIOS Setup 45