Mackie DFX 12 Owner's Manual - Page 21

APPENDIX B: Technical Info Specifications DFX•6, DFX•12 Mixer Section Frequency Response Mic Input to any Main output (GAIN at 0 dB): +0, -1 dB, 16 Hz to 30 kHz Distortion THD and SMPTE IMD; 20Hz to 20kHz Mic Input to Main Output: < 0.05% @ +4 dBu output Noise 20Hz to 20kHz BW (150Ω source impedance) Equivalent Input Noise (EIN): -127 dBu Residual Output Noise: Main, Monitor, & Effects outputs Channel & Master levels off -95 dBu Common Mode Rejection Ratio (CMRR) 60 dB @ 1kHz, Gain @ unity Crosstalk Adjacent Inputs or Input to Output: -90 dB @ 1kHz Fader Off -90 dB @ 1kHz Mute Switch and Break Switch Mute -80 dB @ 1kHz Input Level Trim Control Range 0 to +50 dB Phantom Power +48V DC on mono channels Equalization Low Cut: 75 Hz, -18 dB/octave Channel EQ: High ±15 dB @ 12kHz Low ±15 dB @ 80Hz Stereo Graphic EQ (5 bands): Q = 1.414, ISO octave centers ±12 dB @ 60, 250, 1k, 3.5 k, 12 kHz Mixer Rated Output Main, Aux, & EFX: +4 dBu Maximum Rated Output: +20 dBu Maximum Input Levels Mic Input: -28 dBu, Gain @ +50 dB +18 dBu, Gain @ +6 dB Line Input: -8 dBu, Gain @ +30 dB +38 dBu, Gain @ -15 dB Insert Input, Stereo Line Input, Tape Input, and Effects Return: +20 dBu Maximum Voltage Gain Mic Input to Insert Output: Tape Output: Main Output: Aux Send: Line Input to Insert Output: Tape Output: Main Output: Aux Send: Stereo Line Input to Tape Output: Main Output: Aux Send: Tape Input to Main Output: Effects Return to Main Output: 50 dB 60 dB 76 dB 85 dB 30 dB 40 dB 56 dB 66 dB 20 dB 40 dB 50 dB 22 dB 22 dB Input Impedance Mic Input: 3 kΩ, balanced Line Input: 40 kΩ, balanced Insert Input, Stereo Line Input, Tape Input, and Effects Returns: 10 kΩ, unbalanced Output Impedance Main Output, Insert Output, Tape Output, and Effects Sends: 150 Ω Digital Effects Resolution: Number of Presets: 16-bit, 2-channel 16 Channel Level Set LED (Sensitivity) 0 dBu (normal operating level) VU Meters Main L/R 12 segments: Clip (+16), +12, +8, +4, 0, -4, -8, -12, -16, -20, -24, and -30 AC Power Requirements 100 - 240 VAC, 50/60 Hz, 30 watts (Capable of operation from 85% to 110% of rated line voltage.) Disclaimer Since we are always striving to make our products better by incorporating new and improved materials, components, and manufacturing methods, we reserve the right to change these specifications at any time without notice. "Mackie.," the "Running Man" figure, "DFX," and "EMAC" are trademarks or registered trademarks of Mackie Designs Inc. All other brand names mentioned are trademarks or registered trademarks of their respective holders, and are hereby acknowledged. ©2002 Mackie Designs Inc. All Rights Reserved. 21