Magnavox 13MT1532 User manual, English (US) - Page 5
Basic Cable TV Connection, Basic Antenna Connection
View all Magnavox 13MT1532 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
1 Basic Antenna Connection Acombination antenna receives normal broadcast channels (VHF 2-13 and UHF 14-69). Your connection is easy since there is only one 75Ω (ohm) antenna plug on the back of your TV and that's where the antenna goes. 1 If your antenna has a round cable (75 ohm) on the end, then you're ready to connect it to the TV. Go to step 2. If your antenna has flat twinlead wire (300 ohm), you first need to attach the antenna wires to the screws on a 300 to 75 ohm adapter (not supplied with TV). 2 Push the round end of the adapter or antenna cable onto the 75Ω jack on the rear of the TV. If the round end of the antenna cable is threaded, screw it down tight. Combination VHF/UHF Antenna (Outdoor or Indoor) 75Ω Rear of TV Twin Lead Wire 75Ω Round Cable 75Ω Basic Cable TV Connection If Cable TV signal into your home is a single cable (75 ohm) the connection to the TV is easy. 1 Connect the Cable TV cable directly to the 75Ω jack on the TV. Helpful Hints Cable TV Signal 75Ω Rear of TV If no Video Signal is present, the TV will display a "BLUE" screen and shut itself off in about 5 minutes. If the TV is tuned to the AV channel and there is no Video Signal present, the screen will remain black and the TV will shut itself off in about 5 minutes. Use Auto Program as described on panel 9 to set up channels that are available in your area. Use the CH +/- buttons to scan available channels. RF Coaxial 75Ω Cable 75Ω