Magnavox 52MF437S User manual, English (US) - Page 23
Select your connections, 6 Set your clock
View all Magnavox 52MF437S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
ENGLISH - Emergency Alert Signalling is not possible: - with multimedia browser; - with analog video sources. - You always have the possibility to remove the message from the screen. - The message display will overlap whatever menu element or other message is on the screen. 7.4.4 Downloaded rating table This allows you to add region ratings lock options next to your current ones. TV menu / Installation Preferences Location Volume bar Show emergency alerts Downloaded rating table Downloaded rating table Off On Info ! Before activating, please ensure regional ratings are broadcasted. 7.5 Select your connections This allows you to identify the type of accessory device you have connected to each particular input and output. 1. Select Connections. Menu TV Installation Language Channel installation Preferences Connections Clock Reset AV settings Info Connections AV1 AV2 AV3 HDMI 1 HDMI 2 HDMI 3 Side AUDIO IN L/R DIGITAL AUDIO IN 2. Press the cursor right to enter the list of types of external inputs. 3. Select the appropriate input with the cursor up/down. > When you select AV1, AV2, AV3, HDMI 1, HDMI 2, HDMI 3, Side, AUDIO IN L/R or DIGITAL AUDIO IN a list appears allowing you to identify which type of accessory device is attached to this input. 4. Press the cursor right again to enter the list of types of devices connected to the selected input. 5. Select the accessory device with the cursor up/down. Digital Audio In If an accessory device has a digital audio output, you can connect this with a single cable to the TV's DIGITAL AUDIO IN jack. In the Connections menu, assign the DIGITAL AUDIO IN to the corresponding external input to which your accessory device is connected. In addition to accepting audio input via Digital Audio In, the TV can output encoded Dolby Digital audio via the DIGITAL AUDIO OUT connector to an external amplifier or receiver. If your amplifier or receiver has a matching connector for Digital Audio In, you can connect it with a single cable to the TV's digital audio out. See Chapter 10.2 To make Video and Audio connections, Home theater amplifier 7.6 Set your clock This allows you to set the time and day. Adjusting the clock is necessary for the correct working of Lock after (See Chapter 6 Adjust feature menu settings) features. TV menu Installation Language Channel installation Preferences Connections Clock Reset AV settings Clock Auto clock mode Auto clock channel Time Day Time zone Daylight saving Info 7.6.1 Auto clock mode 1. Select Clock in the Installation menu. 2. Press the cursor right to select the Auto clock mode. 3. Press the cursor right to instruct the TV to get the time automatically or manually. Most of the TV channels are not transmitting clock information. There are few cable channels but they are at the end of the channel ring. There is no clock transmission in antenna channels. In such cases either clock extraction is taking a long time or there is no clock 7.6.2 Auto clock channel (only available when Auto clock mode is set to Automatic) With the cursor buttons, select the channel number on which time can be found by the TV. Typically time can be found on PBS (Public Broadcasting System) as well as some other channels 7.6.3 Time - Day (only available when Auto clock mode is set to Manual) With the cursor buttons, select and enter the correct time and day. If Auto clock mode Manual has been selected, and no clock search has been done, the system will keep the entered time and day 7.6.4 Time zone (only available when Auto clock mode is set to Automatic) This function allows you to select your local time zone. Broadcasted time information will correct the clock display for your local time. 1. Select Time zone with the cursor down. 2. Press the cursor right to select your local time zone 19