Magnavox MDV540VR User manual, English (US) - Page 72
Glossary
![]() |
View all Magnavox MDV540VR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
H9660UD_2.qx4 04.4.14 4:48 PM Page 72 72 Glossary AUDIO IN/OUT Jacks: jacks on the front and back of the DVD/VCR that receive audio from another source (IN) or send audio to another system (OUT).These jacks are red (right) and white (left). Automatic Channel Setup: process in which the VCR memorizes all available TV channels.Then, when you press NEXT ∑/CH o or PREV w/CH p in VCR mode, you only scan through channels you receive. Bands: settings that allow you to tune channels. • Antenna - VHF (very high frequency; channels 2-13) and UHF (ultra high frequen- cy; channels 14-69). • Cable - standard channels 1-125 may be received without a Cable Box. Cable Box/Satellite Receiver Output Channel: 03 or 04. COAXIAL DIGITAL AUDIO OUT jack: Sends digital audio to a Stereo, allowing you to adjust the volume at the Stereo.This connection provides the 5.1 channel surround sound as heard in movie theaters.This jack on the DVD/VCR is black. COMPONENT VIDEO OUT (Y CB/PB CR/PR) Jacks: jacks on the back of the DVD/VCR that send high-quality DVD video to a TV with Component Video In jacks. This connection provides the best picture quality for the DVD Player of the DVD/VCR. Dolby Digital: A surround sound system that provides 5.1 channel sound as used in movie theaters. Dubbing: copying a video cassette using another VCR. HQ: high quality; a feature in the VCR circuitry which provides enhanced picture detail. Line Input: The channel to which you set your DVD/VCR during video cassette copying. If you connected the other video equipment to the AUDIO and VIDEO In jacks on the front of the DVD/VCR, select L2. If you used the AUDIO and VIDEO IN jacks on the back of the DVD/VCR, select L1. If you accidentally enter Line Input mode, press NEXT ∑/CH o or PREVw/CH p or the Number buttons to select another channel. OTR: One-Touch Recording; a timed recording on the VCR that starts immediately and records for 30 minutes to 8 hours. RF coaxial cable: A black cable supplied with your DVD/VCR. Use it to connect your DVD/VCR to your TV, Cable Box, or Satellite Receiver. S-Video: Produces a clearer DVD picture by sending separate signals for the luminance and the color. S-Video only provides a picture for the DVD Player of the DVD/VCR. Tape Speeds: how fast the video cassette travels during a recording or playback.The faster the tape speed, the better the picture quality. Slower tape speeds affect picture quality, but you can record more onto a videotape. • SP (standard play) - fastest tape speed (recording time for a T120 tape is approxi- mately two hours); best picture quality. • LP (long play) - average tape speed.You cannot record in LP with this VCR. If tapes were recorded on a different VCR in LP speed, the tape will play in LP on the DVD/VCR. • SLP (super long play) - slowest tape speed (recording time for a T120 tape is approximately six hours).This speed allows the maximum recording on a single videotape. VIDEO IN/OUT Jacks: jacks on the front and back of the DVD/VCR that receive video from another source (IN) or send video to other video equipment or a TV (OUT).These jacks are yellow.
![](/manual_guide/products/magnavox-mdv540vr-user-manual-english-32af89f/72.png)