Makita LS1219L LS1219L Instruction Manual - Page 31

Adjusting the laser line position

Get Makita LS1219L PDF manuals and user guides View all Makita LS1219L manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

5. Plug in the tool and turn on the laser switch. 6. Loosen the adjusting screw. To move the laser line away from the blade, turn the range adjustment screws counterclockwise. To move the laser line close to the blade, turn the range adjustment screw clockwise. Adjusting the laser line on the left side of the blade 1 2 1 3 4 5 2 ► 1 . Left 45° adjusting bolt 2. Right 45° adjusting bolt Adjusting the laser line position For model LS1219L only WARNING: The tool must be plugged in while adjusting the laser line. Take extra care not to switch on the tool during adjustment. Accidental start up of the tool may result in serious personal injury. ► 1 . Adjusting screw 2. Range adjustment screw 3. Hex wrench 4. Laser line 5. Saw blade Adjusting the laser line on the right side of the blade CAUTION: Never look directly into the laser beam. Direct eye exposure to the beam could cause 1 serious damage to your eyes. NOTICE: Check the position of laser line regu- 2 larly for accuracy. NOTICE: Beware that impacts to the tool. It may cause the laser line to be misaligned or may cause damage to the laser, shortening its life. NOTICE: Have the tool repaired by a Makita authorized service center for any failure on the 3 laser unit. The movable range of laser line is decided by the range adjustment screws on both sides. Perform following procedures to alter the laser line position. 1. Unplug the tool. 2. Draw a cutting line on the workpiece and place it on the turn base. At this time, do not secure the workpiece with a vise or similar securing device. 3. Lower the handle and align the cutting line with the saw blade. 4. Return the handle to the original position and secure the workpiece with the vertical vise so that the workpiece does not move from the position you have determined. 31 4 5 ► 1 . Adjusting screw 2. Range adjustment screw 3. Hex wrench 4. Laser line 5. Saw blade ENGLISH

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
31
ENGLISH
1
2
►
1.
Left 45° adjusting bolt
2.
Right 45° adjusting bolt
Adjusting the laser line position
For model LS1219L only
WARNING:
The tool must be plugged in while
adjusting the laser line. Take extra care not to
switch on the tool during adjustment.
Accidental
start up of the tool may result in serious personal injury.
CAUTION:
Never look directly into the laser
beam.
Direct eye exposure to the beam could cause
serious damage to your eyes.
NOTICE:
Check the position of laser line regu-
larly for accuracy.
NOTICE:
Beware that impacts to the tool.
It may
cause the laser line to be misaligned or may cause
damage to the laser, shortening its life.
NOTICE:
Have the tool repaired by a Makita
authorized service center for any failure on the
laser unit.
The movable range of laser line is decided by the range
adjustment screws on both sides. Perform following
procedures to alter the laser line position.
1.
Unplug the tool.
2.
Draw a cutting line on the workpiece and place it
on the turn base. At this time, do not secure the work-
piece with a vise or similar securing device.
3.
Lower the handle and align the cutting line with
the saw blade.
4.
Return the handle to the original position and
secure the workpiece with the vertical vise so that the
workpiece does not move from the position you have
determined.
5.
Plug in the tool and turn on the laser switch.
6.
Loosen the adjusting screw. To move the laser line
away from the blade, turn the range adjustment screws
counterclockwise. To move the laser line close to the
blade, turn the range adjustment screw clockwise.
Adjusting the laser line on the left side of the blade
4
5
1
3
2
►
1.
Adjusting screw
2.
Range adjustment screw
3.
Hex wrench
4.
Laser line
5.
Saw blade
Adjusting the laser line on the right side of the
blade
1
4
2
3
5
►
1.
Adjusting screw
2.
Range adjustment screw
3.
Hex wrench
4.
Laser line
5.
Saw blade