Makita XAG21ZU XAG20/XAG21 Instruction Manual - Page 15

WIRELESS ACTIVATION FUNCTION For XAG21 only What you can do with the wireless activation function The wireless activation function enables clean and comfortable operation. By connecting a supported vacuum cleaner to the tool, you can run the vacuum cleaner automatically along with the switch operation of the tool. 1. Open the lid on the tool as shown in the figure. 1 ► 1 . Lid 2. Insert the wireless unit to the slot and then close the lid. When inserting the wireless unit, align the projections with the recessed portions on the slot.  To use the wireless activation function, prepare following items: • A wireless unit • A vacuum cleaner which supports the wireless activation function The overview of the wireless activation function setting is as follows. Refer to each section for detail procedures. 1. Installing the wireless unit 2. Tool registration for the vacuum cleaner 3. Starting the wireless activation function Installing the wireless unit CAUTION: Place the tool on a flat and stable surface when installing the wireless unit. NOTICE: Clean the dust and dirt on the tool before installing the wireless unit. Dust or dirt may cause malfunction if it comes into the slot of the wireless unit. NOTICE: To prevent the malfunction caused by static, touch a static discharging material, such as a metal part of the tool, before picking up the wireless unit. NOTICE: When installing the wireless unit, always be sure that the wireless unit is inserted in the correct direction and the lid is completely closed. 1 3 2 ► 1 . Wireless unit 2. Projection 3. Lid 4. Recessed portion When removing the wireless unit, open the lid slowly. The hooks on the back of the lid will lift the wireless unit as you pull up the lid. 15 ENGLISH