Makita XAG21ZU XAG20/XAG21 Instruction Manual - Page 7
Functional, Description
View all Makita XAG21ZU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
6. Do not operate the wireless unit in places where medical instruments, such as heart pace makers are near by. 7. Do not operate the wireless unit in places where automated devices are near by. If operated, automated devices may develop malfunction or error. 8. The wireless unit can produce electromagnetic fields (EMF) but they are not harmful to the user. 9. The wireless unit is an accurate instrument. Be careful not to drop or strike the wireless unit. 10. Avoid touching the terminal of the wireless unit with bare hands or metallic materials. 11. Always remove the battery on the tool when installing the wireless unit. 12. When opening the lid of the slot, avoid the place where dust and water may come into the slot. Always keep the inlet of the slot clean. 13. Always insert the wireless unit in the correct direction. 14. Do not press the wireless activation button on the wireless unit too hard and/or press the button with an object with a sharp edge. 15. Always close the lid of the slot when operating. 16. Do not remove the wireless unit from the slot while the power is being supplied to the tool. Doing so may cause a malfunction of the wireless unit. 17. Do not remove the sticker on the wireless unit. 18. Do not put any sticker on the wireless unit. 19. Do not leave the wireless unit in a place where static electricity or electrical noise could be generated. 20. Do not leave the wireless unit in a place subject to high heat, such as a car sitting in the sun. 21. Do not leave the wireless unit in a dusty or powdery place or in a place corrosive gas could be generated. 22. Sudden change of the temperature may bedew the wireless unit. Do not use the wireless unit until the dew is completely dried. 23. When cleaning the wireless unit, gently wipe with a dry soft cloth. Do not use benzine, thinner, conductive grease or the like. 24. When storing the wireless unit, keep it in the supplied case or a static-free container. 25. Do not insert any devices other than Makita wireless unit into the slot on the tool. 26. Do not use the tool with the lid of the slot damaged. Water, dust, and dirt come into the slot may cause malfunction. 27. Do not pull and/or twist the lid of the slot more than necessary. Restore the lid if it comes off from the tool. 28. Replace the lid of the slot if it is lost or damaged. SAVE THESE INSTRUCTIONS. FUNCTIONAL DESCRIPTION CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge CAUTION: Always switch off the tool before installing or removing of the battery cartridge. CAUTION: Hold the tool and the battery cartridge firmly when installing or removing battery cartridge. Failure to hold the tool and the battery cartridge firmly may cause them to slip off your hands and result in damage to the tool and battery cartridge and a personal injury. 2 1 3 ► 1 . Red indicator 2. Button 3. Battery cartridge To remove the battery cartridge, slide it from the tool while sliding the button on the front of the cartridge. To install the battery cartridge, align the tongue on the battery cartridge with the groove in the housing and slip it into place. Insert it all the way until it locks in place with a little click. If you can see the red indicator on the upper side of the button, it is not locked completely. CAUTION: Always install the battery cartridge fully until the red indicator cannot be seen. If not, it may accidentally fall out of the tool, causing injury to you or someone around you. CAUTION: Do not install the battery cartridge forcibly. If the cartridge does not slide in easily, it is not being inserted correctly. 7 ENGLISH