Marantz SR6005 SR6005 User Manual - English - Page 18
Connections
View all Marantz SR6005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
ENGLISH DEUTSCH Connections FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Important information • Make connections as follows before using this unit. Select an appropriate connection type according to the components to be connected. • You may need to make some settings on this unit depending on the connection method. Refer to each description for more information. • Select the cables (sold separately) according to the components being connected. NOTE • Do not plug in the power cord until all connections have been completed. • When making connections, also refer to the operating instructions of the other components being connected. • Be sure to connect the left and right channels properly (left with left, right with right). • Do not bundle power cords together with connection cables. Doing so can result in noise. Converting input video signals for output (Video conversion function) This unit is equipped with three types of video input connectors (HDMI, Component video and video) and three types of video output connectors (HDMI, Component video and video). Use the connectors corresponding to the components to be connected. This function automatically converts various formats of video signals input to this unit into the formats used to output the video signals from this unit to a monitor. GFlow of video signals for MAIN ZONEH Video device This unit Monitor Output HDMI connector Input (IN) HDMI connector Output (MONITOR OUT) HDMI connector Input HDMI connector in Set as Necessary • Set when not using the video conversion function. "Video Convert" (vpage 54) • Set when changing the resolution of the video signal. "Resolution" (vpage 54) • The video conversion function supports the NTSC, PAL, SECAM, NTSC 4.43, PAL-N, PAL-M and PAL-60 formats. • The resolution of the video signal input to this unit's HDMI connector is the one set at "Resolution" (vpage 54). (1080p HDMI signals and 1080p component signals are output at 1080p, regardless of the setting.) • Resolutions of HDMI-compatible TVs can be checked at "HDMI Monitor Information" (vpage 68). NOTE • HDMI signals cannot be converted into analog signals. • When a non-standard video signal from a game machine or some other source is input, the video conversion function might not operate. • Component video input signals cannot be converted into Video format. • A menu is output via the HDMI connector or component video connector. Examples of screen display • Menu screen • Status display screen When the input source is switched When the volume is adjusted MENU Audio/Video Adjust Information Auto Setup Manual Setup Input Setup Component video connectors Video connector Component video connectors Video connector Component video connectors Video connector Component video connectors Video connector Adjust various audio and video parameters Input BD Mode STEREO Auto Master Volume -80.0dB Status display: The operating status appears briefly on the screen when the input source is switched or the volume is changed. NOTE • If you operate the menu while playing back 3D video content, the playback video is replaced by the menu screen. The playback video is not displayed behind the menu screen. • This unit does not show the status display while playing back 3D video content. 14