Marantz SR6005 SR6005 User Manual - English - Page 63
Manual EQ, M-DAX, Audio Delay
View all Marantz SR6005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Simple version Basic version SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH nnManual EQ Default settings are underlined. Use the graphic equalizer to adjust the tone of each speaker. "Manual EQ" can be set when "MultEQ®" setting (vpage 57) is "Manual" Setting items Setting details Adjust CH Correct the tone of each speaker. q Select the speaker tone adjustment method. All : Adjust the tone of all speakers together. L/R : Adjust the tone of left and right speakers together. Each : Adjust the tone of each speaker. w Select the speaker. e Select the adjustment frequency band. 63Hz / 125Hz / 250Hz / 500Hz / 1kHz / 2kHz / 4kHz / 8kHz / 16kHz • Select the speakers you want to adjust when "L/R" or "Each" is selected. r Adjust the level. -20.0dB - +6.0dB (0.0dB) Base Curve Copy Yes : Copy. Copy "Audyssey Flat" curve No : Do not copy. from MultEQ®. "Base Curve Copy" is displayed after Audyssey® Auto Setup has been performed. Default The "Manual EQ" settings are returned to the default settings. Yes : Reset to the defaults. No : Do not reset to the defaults. Audio/Video Adjust nnM-DAX Default settings are underlined. Compressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the amount of data by eliminating signal components that are hard for the human ear to hear. The M-DAX function generates the signals eliminated upon compression, restoring the sound to conditions near those of the original sound before compression. It also corrects the sense of volume of the bass to obtain richer sound with compressed audio signals. Setting details OFF : Do not use M-DAX. LOW : Optimized mode for compressed sources with normal highs. MID : Apply suitable bass and treble boost for all compressed sources. HIGH : Optimized mode for compressed sources with very weak highs. • This item can be set with analog signals or when a PCM signal (fs = 44.1/48 kHz) is input. • This cannot be set when the surround mode is set to "DIRECT" or "PURE DIRECT". • If a setting other than "OFF" is selected, the M-DAX indicator lights. • This can also be set by pressing M-DAX on the remote control unit. Each time M-DAX is pressed, the setting is changed as shown below. OFF LOW MID HIGH nnAudio Delay Default settings are underlined. While viewing video, manually adjust the time to delay audio output. 0ms - 200ms Setting details • This item can be set within the range of 0 to 200 ms when "Auto Lip Sync" is set to "ON" and when a TV compatible with Auto Lip Sync is connected. • Store "Audio Delay" for each input source. • Audio Delay for game mode can be set when "Video Mode" (vpage 54) is set to "Auto" or "Game". • This can also be set by pressing A.DELAY on the remote control unit. Advanced version Information Remote control operation buttons Move the cursor (Up/Down/Left/Right) Confirm the setting Return to previous menu 59