Marantz SR6005 SR6005 User Manual - English - Page 68

ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA HDMI Setup Default settings are underlined. Make settings for HDMI video/audio output. Setting items Setting details RGB Range Set the video range of RGB output from the HDMI connector. Normal : Output with RGB video range (16 (black) to 235 (white)). Enhanced : Output with RGB video range (0 (black) to 255 (white)). This setting is active when using a TV equipped with a DVI terminal. Auto Lip Sync Make automatic compensation for timing shift in audio and video output. ON : Compensated. OFF : Not compensated. HDMI Audio Out Select HDMI audio output device. AMP : Play back through speakers connected to the receiver. TV : Play back through TV connected to the receiver. When the HDMI control function is activated, priority is given to the TV audio setting (vpage 42 "HDMI control function"). HDMI Control You can link operations with devices connected to HDMI and compatible with HDMI Control. ON : Use HDMI control function. OFF : Do not use HDMI control function. • When a device that is not compatible with the HDMI control function is connected, set "HDMI Control" to "OFF". • Please consult the operating instructions for each connected component to check the settings. • Refer to "HDMI control function" (vpage 42) for more information about the HDMI control function. NOTE • When "HDMI Control" is set to "ON", it consumes more standby power. If you are not using this unit for an extended period, it is recommended that you unplug the power cord from the power outlet. • "HDMI Control" does not work when the power to the equipment is off. Either turn power on or set to standby. • The HDMI control function controls operations of a TV that is compatible with the HDMI control function. Make sure that the TV and HDMI are connected when you perform HDMI control. • If the "HDMI Control" settings have been changed, always reset the power to connected devices after the change. Manual Setup Setting items Setting details Standby Source Sets the HDMI input source to put into standby when the power is on. Last : This item is set at the last-used input source. HDMI1 / HDMI2 / HDMI3 / HDMI4 / HDMI5 / HDMI6 : Put the respective input source into standby. "Standby Source" can be set when "HDMI Control" is set to "ON". Power Off Control Links the power standby of this unit to external equipment. All : If power to a connected TV is turned off independently of the input source, power to this unit is automatically set to standby. Video : If power to a connected TV is turned off when the input source is BD / DVD / VCR / SAT / GAME / AUX1 / TV, power to this unit is automatically set to standby. OFF : This unit does not link with power to a TV. "Power Off Control" can be set when "HDMI Control" is set to "ON". Audio Setup Default settings are underlined. Make settings for audio playback. Setting items Setting details 7.1ch IN SW Level Subwoofer Level : Set playback level of subwoofer signal input from the Setup playback method for 7.1CH INPUT connector. analog signals inputted from • +10dB : This is the recommended level. 7.1CH INPUT connectors. • +15dB / +5dB / 0dB : Select the level according to the player being used. EQ Customize Audyssey Byp. L/R : Set when not using "Audyssey Byp. L/R" equalizer. Set so that unused equalizer • Used : Use. settings are not displayed • Not Used : Do not use. when MULTEQ is pressed. Set so that "Audyssey Byp. L/R" settings can be made when Audyssey® Auto Setup is performed. Audyssey Flat : Set when not using "Audyssey Flat" equalizer. • Used : Use. • Not Used : Do not use. Set so that "Audyssey Flat" settings can be made when Audyssey Auto Setup is performed. Manual : Set when not using the "Manual" equalizer. • Used : Use. • Not Used : Do not use. 64 Remote control operation buttons Move the cursor (Up/Down/Left/Right) Confirm the setting Return to previous menu