Maytag MED7500YW Use & Care Guide - Page 11

Installation spacing for recessed area or closet installation n All dimensions show recommended and minimum spacing allowed. n Additional spacing should be considered for ease of installation and servicing. n Additional clearances might be required for wall, door, floor moldings, and dryer venting. n Additional spacing should be considered on all sides of the dryer to reduce noise transfer. n For closet installation with a door, minimum ventilation openings in the top and bottom of the door are required. Louvered doors with equivalent ventilation openings are acceptable. n Companion appliance spacing should also be considered. Custom undercounter installation (dryer only): 331/4" (845 mm) 1" (25 mm) (251m" m) Recessed or closet installation (dryer only): 18"9m" in ((425279 mmmm)) 3" (76 mm) 48 in.2 (310 cm2) Recessed or closet installation - Stacked with stack kit (Accessory): 12" (305 mm) 3" (76 mm) 653/4" (1670 mm) 48 in.2 (310 cm2) 51/4" (133 mm) 3" (76 mm) 24 in.2 (155 cm2) 1" 1" (25 mm) (25 mm) Mobile home - Additional installation requirements: This dryer is suitable for mobile home installations. The installation must conform to the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 (formerly the Federal Standard for Mobile home construction and Safety, Title 24, HUD Part 280). Mobile home installations require: n Metal exhaust system hardware, available for purchase from your dealer. n Special provisions must be made in mobile homes to introduce outside air into dryer. Openings (such as a nearby window) should be at least twice as large as dryer exhaust opening. 3" (76 mm) 3" (76 mm) 24 in.2 (155 cm2) 1" 1" (25 mm) (25 mm) 11