Maytag MED7500YW Use & Care Guide - Page 4

OPERATING INSTRUCTIONS CONTROL PANEL AND FEATURES 4 1 2 3 5 1 START BUTTON Press to start a cycle. Indicator light will glow to indicate the cycle has started. 2 TEMPERATURE BUTTON The Temperature Control button lets you choose between a normal and low drying temperature. NOTE: Always refer to the care label on the garment to determine whether it can be tumble dried. Normal The Normal temperature setting is for sturdy fabrics, such as cotton, linen, and denim. If the Temperature Control button is not pressed in, the temperature setting is Normal. Low The Low setting is for synthetics, such as cotton/polyester blend, rayon, acetate, washable silk, or nylon. If the Temperature Control button is pressed in, the temperature setting is Low. 3 POWER BUTTON Press to turn the dryer on and off. Indicator light will flash to indicate the power is on. 4 CYCLE CONTROL KNOB Use your dryer's Cycle Control knob to select available cycles on your dryer. Turn the knob to select a cycle for your laundry load. Indicator light will flash to indicate a cycle has been selected. See "Cycle Guide" for detailed descriptions of cycles. 5 POWER INDICATOR This light flashes when the power is on and glows when a cycle is running. END OF CYCLE SIGNAL The dryer sounds a signal to let you know when the cycle is complete. The signal is not adjustable and cannot be turned off. The signal is helpful when you are drying permanent press, synthetics, and other items that should be removed promptly at the end of the cycle. 4