Maytag MEDB700VQ Use and Care Guide - Page 23

Followtheprogreosfsyourdryewr iththedryingStatuinsdicatolirghts. wet dampdcoowonl dry wprreinvkelnet I chelcinkst creen Wet The Wet light illuminates at the beginning of a Sensor Cycle if a wet item is detected. • In a Sensor Cycle, if a wet item is not detected after approximately 5 minutes, the dryer goes directly into Coo[ Down. The Coo[ Down and the Wrinkle Prevent setting indicators will illuminate, if selected. • In a Timed Cycle, wet items are not detected. The dryer will continue to run for the length of time selected, and the Wet light will illuminate. The Damp light will not illuminate. Damp The Damp light illuminates in a Sensor Cycle when the laundry Damp Dry signal beeps, if selected. See "Options." is approximately 80% dry. Cool Down The Coo[ Down light i[[urninates ease in handling. during the Coo[ Down part of the cycle. I.aundry cools for Dry The Dry light i[[urninates Wrinkle Prevent setting. when the drying cycle is finished. This indicator stays on during the Wrinkle Prevent The Wrinkle Prevent setting light i[[urninates on during the Wrinkle Prevent setting. when this option is selected. This indicator stays Indicator lights Other indicator lights show Cycle, Modifiers, Options, and Cycle Signal settings selected. The display shows the estimated or actual time remaining. Select the drying cycle that matches the type of load you are drying. See Sensor or Timed Cycle Settings charts. heaw normal wrinkle control ycles timed cycles _ timed dr_ rapid dr' freshen up icate Sensor Cycles Sensor Cycles allow you to match the cycle to the load you are drying. See the following Sensor Preset Cycle Settings chart. Each cycle dries certain fabrics at the recommended temperature. A sensor detects the moisture in the load and automatically adjusts the drying time for optimal drying. An alternate temperature is se[ectab[e for all cycles with the exception of the Delicate by pressing the TEMP I.EVEI. button. Heavy Duty Use this cycle to get regular heat for heavyweight mixed loads, cottons, and jeans. Normal Use this cycle to get medium heat for drying sturdy fabrics such as work clothes and sheets. Wrinkle Control Use this cycle to get low heat for drying no-iron fabrics, such as sport shirts, casual business clothes, and permanent press blends. Delicate Use this cycle to get extra-low heat to gently dry iterns such as lingerie, blouses, or washable knit fabrics. Sensor Preset Cycle Settings Sensor Cycles Load Type HEAVY DUTY Heavyweight rnixed loads, cottons, jeans NORMAL Corduroys, work clothes, sheets WRINKLE CONTROL Business casual clothes, perrnanent press, synthetics DELICATE I.ingerie, blouses, washable knit fabrics Temperature Regular* Mediurn heat is selectable alternate temperature. as an Medium* I.ow heat is se[ectab[e alternate temperature. as an Low* Extra-low heat is selectable as an alternate temperature. Extra-Low * Preferred setting Timed Cycles Use Timed Cycles to select a specific amount of drying time and a drying temperature. When a Timed Cycle is selected, the Estimated Time Remaining display shows the actual time remaining in your cycle. You can change the actual time in the cycle by pressing TIME ADJUST + (plus) or - (minus). See "Changing Cycles, Modifiers, and Options." NOTE: Timed Cycles may also be used with the drying rack. See "Drying Rack Option."