Maytag MFC2061HEW Use and Care Guide - Page 31
Automatic Ice, Maker, Connecting the Water Supply, Temperature Controls, Temp Alarm, Sabbath Mode,
![]() |
UPC - 719881157368
View all Maytag MFC2061HEW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Troubleshooting PROBLEM Ice maker is not producing ice POSSIBLE CAUSES Ice maker arm is on OFF position. Household water supply is not reaching water valve. Copper tubing has kinks. Water pressure is too low. Check freezer temperature. Temp Alarm Light is flashing Exceeded normal operating temperatures. All lights on dispenser and interior lights are off and appliance is still running Control has been set to Sabbath Mode. Door alarm set, no alarm sounded Temperatures in display look too low Alarm mode has been disabled. Temperature display has been set to Celsius rather than Fahrenheit. WHAT TO DO Confirm ice maker arm is down. See Automatic Ice Maker, page 16. See Connecting the Water Supply page 8. Turn off water supply and remove kinks. If kinks cannot be removed, replace tubing. Water pressure must be between 35 to 100 pounds per square inch to function properly. A minimum pressure of 35 pounds per square inch is recommended for refigerators with water filters. See Temperature Controls, pages 10-12. Freezer temperature should be between 0° to 2° F (-18° to -17° C) to produce ice. See Temp Alarm, pages 11-12. See, Sabbath Mode, page 12. To activate audible alarms, refer to pages 11-12. See Temperature display on page 11. 30
![](/manual_guide/products/maytag-mfc2061hew-use-care-guide-6b5ca34/31.png)