Maytag MFC2061HEW Use and Care Guide - Page 5
Pullout Freezer Drawer, Door and Drawer Removal - white
UPC - 719881157368
View all Maytag MFC2061HEW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Installation 7. Replace the toe grille. • Align the toe grille mounting clips with the lower cabinet slots. • Push the toe grille firmly until it snaps into place. Door and Drawer Removal Some installations require door/drawer removal to transport the refrigerator to its final location. 7. Unscrew 5⁄16" hex head screws from top hinge to remove hinge and retain for later use. • Lift left side refrigerator door, along with top hinge, from center hinge pin. • Remove center hinge pin with a 5⁄16" hex head driver and retain hinge pin for later use. Materials Needed: • Phillips screwdriver • 5⁄16" hex head driver • 3⁄8" hex head driver WARNING To avoid electrical shock which can cause severe personal injury or death, observe the following: • Disconnect power to refrigerator before removing doors or drawer. Connect power only after replacing doors or drawer. CAUTION To avoid damage to walls and flooring, protect vinyl or other flooring with cardboard, rugs or other protective material. 1. Unplug power cord from power source. 2. Remove toe grille (see page 3). 3. Remove top hinge cover from refrigerator door by removing Phillips screw and retain screw and cover for later use. 4. Unscrew 5⁄16" hex head screws from top hinge to remove hinge and retain all screws for later use. 8. Remove Phillips screws to remove right and left hinges and retain all screws for later use. 9. Remove both stabilizing brackets with 3⁄8" hex head driver and retain screws for later use. Pullout Freezer Drawer DANGER To prevent accidental child entrapment or suffocation risk, do not remove the divider in the top freezer basket. WARNING To avoid electrical shock which can cause severe personal injury or death, disconnect power to refrigerator before removing doors. After replacing doors, connect power. CAUTION To avoid possible injury, product, or property damage, you will need two people to perform the following instructions. Materials Needed: • Phillips screwdriver 5. Lift right side refrigerator door from center hinge pin. Remove door closure from center hinge pin on the right side and retain for later use. right side door closure To Remove: 1. Pull drawer open to full extension. 2. Tilt the lower basket forward 6. Disconnect wire harness on top of and lift to remove. left side refrigerator door top 3. On each white drawer hinge. bracket is a basket cradle • Release two-pin connector by pressing junction point with a flat blade screwdriver or fingernail. • Green ground wire remains attached to the hinge. with two snap attachments. To release each cradle, unlatch the snaps by pushing them inward, away from the side bracket. Lift the cradles off of the rails. 4