Maytag MFI2266AEW Use and Care Guide - Page 31

Automatic Ice, Maker, Connecting the Water Supply, Temperature Controls, TempAlarm, Sabbath Mode,

Page 31 highlights

Troubleshooting .i........ Ice maker is not producing ice i !! ii • Ice maker switch is not ON • Household water supply is not reaching water valve. • Copper tubing has kinks. • Water pressure is too low. • Check freezer temperature. • Inner fountain door is blocked or frozen. Temp Alarm Light is flashing All lights on dispenser and interior lights are off and appliance is still running • Exceeded normal operating temperatures. • Control has been set to Sabbath Mode. Door alarm set, no alarm sounded • Alarm mode has been disabled. Temperatures in • Temperature display has been set to display look too low Celsius rather than Fahrenheit. • Confirm ice maker switch is ON. See Automatic Ice Maker, page 12. • See Connecting the Water Supply page 8. • Turn off water supply and remove kinks. If kinks cannot be removed, replace tubing. • Water pressure must be between 35 to 100 pounds per square inch to function properly. A minimum pressure of 35 pounds per square inch is recommended for refigerators with water filters. • See Temperature Controls, pages 10 and 11. Freezer temperature should be between 0° to 2° F (-18° to -17° C) to produce ice. • Do not attempt to free the fountain door by continuously pressing the dispenser button. Contact qualified service technician. • See Temp Alarm, page 11. • See, Sabbath Mode, page 12. • To activate audible alarms, refer to page 11. • See Temperature display on page 11. 30

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96

Troubleshooting
.........
i
i !!
ii
Ice maker is
not
Ice maker switch is not ON
• Confirm ice maker switch is ON. See
Automatic Ice
producing ice
Maker,
page 12.
• See
Connecting the Water Supply
page 8.
• Turn off water supply and remove kinks. If kinks
cannot be removed, replace tubing.
• Water pressure must be between 35 to 100 pounds
per square inch to function properly. A minimum
pressure of 35 pounds per square inch is
recommended for refigerators with water filters.
• See
Temperature Controls,
pages 10 and 11. Freezer
temperature should be between 0° to 2° F (-18° to
-17° C) to produce ice.
Do not
attempt to free the fountain door by
continuously pressing the dispenser button. Contact
qualified service technician.
Temp Alarm
Light
See
TempAlarm,
page 11.
is flashing
• See,
Sabbath Mode,
page 12.
All lights on
dispenser and
interior lights are
off and appliance
is still running
Door alarm set, no
To activate audible alarms, refer to page 11.
alarm sounded
Temperatures
in
• See
Temperature
display on page 11.
display look too low
• Household water supply is not
reaching water valve.
• Copper tubing has kinks.
• Water pressure is too low.
• Check freezer temperature.
• Inner fountain door is blocked or
frozen.
• Exceeded normal operating
temperatures.
• Control has been set to Sabbath
Mode.
• Alarm mode has been disabled.
• Temperature display has been set to
Celsius rather than Fahrenheit.
30