Maytag MFI2266AEW Use and Care Guide - Page 7
Door Reinstallation, Pullout Freezer Drawer
View all Maytag MFI2266AEW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Installation Door Reinstallation 1. Install hinge assemblies: • Install center hinges with Phillips or hex screws. 2. Place hinge side of refrigerator I II door on center hinge pin. • Install top hinge with _A6"hex head screws. 3. While holding refrigerator door upright, tighten down top hinge with 5A6h" ex head driver. 4. Reconnect connector. 5. Connect the waterline tubes firmly by pushing one waterline inside the other. 6. Slide the black locking collar fully forward. 7. Hold tabbed section of waterline. 8. Rotate black locking collar counterclockwise locking water lines in place. A Tabs "click" is heard ensuring waterlines are correctly locked in place. The "arrow" on the tabbed section should align with the 2 bars on the black locking collar. 9. Ensure the connection does not leak before installing the upper hinge cover. 10. Replace top hinge covers. Pullout Freezer Drawer To Remove: 1. Pull drawer open to full extension. 2. Slide freezer bins forward and lift straight out. 3. Remove Phillips screws from each of the drawer slides. 4. Lift top of drawer front to unhook the drawer from the slides. 5. Move drawer slides fully forward. 6. Lift out lower drawer assembly.