Maytag MHWZ400TQ Use and Care Guide - Page 13

Electrical, Plug into, prong, prong., instructions - leaking

Get Maytag MHWZ400TQ - 3.7 cu. Ft. Epic Z Front Load Washer PDF manuals and user guides
UPC - 883049064338
View all Maytag MHWZ400TQ manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

5. After the washer is level, and all four feet are in firm contact with the floo_; use a _)/i_" (14 mm) open-end wrench to turn the Iocknuts on the feet, tightly against the washer cabinet. IMPORTANT: All four feet must be tightened. If the [ocknuts are not tight against the washer cabinet, the washer may vibrate. 6. The washer should not move front to back, side to side, or diagonally top edges. 7. Confirm the levelness of the washer. when pushed on its 1. Check the electrical requirements. Be sure that you have the correct electrical supply and the recommended grounding method. See "Electrical Requirements." 2. Check that all parts are now installed. If there is an extra part, go back through the steps to see which step was skipped. 3. Check that you have all of your tools. 4. Dispose of/recycle all packaging materials. 5. Check that the water faucets are on. 6. Check for leaks around faucets and inlet hoses. Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. 7. Plug into a grounded 3 prong outlet. 8. Read "Washer Use." 9. To test and to clean your washe_; measure _/_the detergent manufacturer's recommended amount of HE High Efficiency detergent for a medium-size load. Pour the detergent into the detergent dispenser. Select NORMAl., and then select START. Allow the washer to complete one whole cycle. Use only HE High Efficiency detergent.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
5.
6.
7.
After
the
washer
is level,
and
all four
feet
are in firm
contact
with
the floo_;
use a
_)/i_"(14
mm) open-end
wrench
to turn
the
Iocknuts
on
the feet,
tightly
against
the
washer
cabinet.
IMPORTANT:
All
four
feet
must
be tightened.
If the
[ocknuts
are not tight
against
the
washer
cabinet,
the washer
may
vibrate.
The washer
should
not
move
front
to back,
side
to side,
or diagonally
when
pushed
on
its
top
edges.
Confirm
the
levelness
of the
washer.
1.
Check
the electrical
requirements.
Be sure that
you
have the
correct
electrical
supply
and
the
recommended
grounding
method.
See "Electrical
Requirements."
2.
Check
that
all parts
are now
installed.
If there
is an extra
part,
go back
through
the
steps to
see which
step was
skipped.
3.
Check
that
you
have
all of your
tools.
4.
Dispose
of/recycle
all packaging
materials.
5.
Check
that
the
water
faucets
are on.
6.
Check
for
leaks around
faucets
and
inlet
hoses.
Electrical
Shock
Hazard
Plug into
a grounded
3 prong
outlet.
Do
not remove
ground
prong.
Do
not
use
an adapter.
Do
not use
an extension
cord.
Failure
to follow
these
instructions
can result
in
death,
fire, or
electrical
shock.
7.
8.
9.
Plug into
a grounded
3 prong
outlet.
Read
"Washer
Use."
To test and to
clean
your
washe_;
measure
_/_the
detergent
manufacturer's
recommended
amount
of
HE High
Efficiency
detergent
for a medium-size
load.
Pour
the detergent
into
the
detergent
dispenser.
Select
NORMAl.,
and
then
select
START. Allow
the washer
to
complete
one
whole
cycle.
Use only HE High Efficiency
detergent.