Maytag MHWZ400TQ Use and Care Guide - Page 5

Gathethr erequiretdoolsandpartsbeforsetartiningstallatioTnh.epartsupplieadreinthe washedrrum. Tools needed for connecting the water inlet hoses • Pliers (that open to 1%_," [39.5 mm]) • Flashlight (optional) Tools needed for connecting the drain hose • I.ocking pliers (that open to 1%_>" [39.5 mm]) Tools needed for installation Open end wrenches • 14 mmand13 mm • I.eve[ Wood block Ruler or measuring tape Parts supplied If You Have Drain hose too short Water faucets beyond reach of fill hoses You Will Need to Buy 4 ft (1.2 m) drain hose extension kit, Part Number 285863 2 longer water fill hoses: 6 ft (1.8 m) Part Number 76314 10 ft (3.0 m) Part Number 350008 Pedestal You have the option of purchasing pedestals of different heights separately for this washer. You may select a 10" (254 mm) or a 15.5" (394 mm) pedestal. The pedestal will add to the total height of the washer. c A. Drain hose form B. Inlet hose (2) C. Inlet hose washer (4) D. 7)ansport bolt hole plug (4) E. Beaded strap £ Drain hose C. Hose clamp Alternate Parts Your installation may require additional parts. If you are interested in purchasing one of the items listed here, call the toll-free number on the cover or in the "Assistance or Service" section. If You Have I_aundry tub or standpipe taller than 96" (2.4 m) You Will Need to Buy Sump pump system (if not aheady available) Overhead sewer Floor drain Standard 20 gal. (76 I.), 30" (762 mm) tall drain tub or utility sink and sump pump (available from local plumbing suppliers) Siphon break, Part Number 285834; additional drain hose, Part Number 8318155; and connector kit, Part Number 285835 Pedestal Height 10" (254 ram) 10" (254 mm) 10" (254 mm) 15.5" (394 mm) 15.5" (394 mm) 15.5" (394 mm) Optional pedestal Approximate height with washer 46" (1168 ram) 46" (1168 mm) 46" (1168 mm) 51.5" (1308 mm) 51.5" (1308 mm) 51.5" (1308 mm) Color White Black Cranberry White Black Blue Model Number MHP1000SQ0 MHP1000SB0 XH P1000WR MHP1500SQ0 MHP1500SB0 MHP1500SK0 Stack Kit Are you planning to stack your washer and dryer? To do so, you will need to purchase a Stack Kit. To order; call the dealer from whom you purchased your washer or refer to the "Assistance or Service" section. Ask for Part Number 8572546.