Maytag MVWC700VW User Instructions - Page 4

Style1:Withliquidfabricsoftenedrispens(eornsomemodels) • UseonlyliquidfabricsofteneinrthisdispensPero.ur measurleiqduidfabricsofteneinrtothedispensSeor.fteniesr addeadutomaticadlluyringtherinseportioonfthecycle. Diluteliquidfabricsoftenebryfillingthedispensweirth wmaarxfmiwll lainteeuarnrrtoilwiqsu.idreachtehseundersiodfetherim.See 9. The Sensi-Care r_l System (on some models) is an integrated set of controls which work together to provide optimal wash temperatures, agitation times, and agitation/spin speeds based on the Fabric Select setting. The controls provide higher wash temperatures for more aggressive, heavy-duty cycles and slightly lower temperatures on cycles for delicate and hand wash items, to provide better fabric care. The timer knob allows you to decrease agitation time for light soils and increase agitation time for heavy soils. 10. Push in the Timer knob and turn it clockwise to the wash cycle you want. Reduce the wash time when using a small water level setting. Pull out the Timer knob to start the washer. Style 2: Without liquid fabric softener dispenser (on some models) • In the final rinse only, add fabric softener that has been diluted with 1/2to 1 cup (125 to 250 ml_) warm water. 5° Close the washer lid. Washer will not agitate or spin with the lid open. 6. Turn the I_OAD SIZE or WATER I_EVEI. selector to the correct setting for your wash load and the type of fabric being washed. • You may change the load size or water level selection after the washer has started filling by turning the selector to a different setting. • On models with a variable Load Size or Water I_evel control, you should turn the knob to RESET, then to desired setting. 7° Select a Wash Temperature based on the type of fabric and soil being washed. Use the warmest wash water safe for the fabric. Follow garment label instructions. The Automatic Temperature Control (ATC) (on some models electronically senses and maintains a uniform water temperature by regulating incoming hot and cold water. • Even in Cool wash, some warm water is let into the washer to maintain a minimum temperature of approximately 70°F (21 °C). Temperature Guide Wash Temp Suggested Fabrics Hot Whites and pastels Durable garments Heavy soils Warm Cool Cold Bright colors Moderate to light soils Colors that bleed or fade I.ight soils Dark colors that bleed or fade I_ight soils NOTE: In wash water temperatures colder than 60°F (15.6°C), detergents do not dissolve well. Soils can be difficult to remove. Some fabrics can retain wear wrinkles and have increased pilling (the formation of small lint-like balls on the surface of garments). 8. You can customize your wash by adding rinse Options to your cycle selections. This knob has settings for: • Extra Rinse - Selecting this option provides a second rinse. An Extra Rinse can be addedto any wash cycle. • Cycle Signal - A tone will sound at the end of the cycle. The sound level cannot be adjusted. • Extra Rinse & Cycle Signal - This option combines both a Extra Rinse and a Cycle Signal at the end of the wash cycle. To stop or restart your washer: • To stop the washer at any time, push in the Timer knob. • To restart the washeb close the lid (if open) and pull out the Timer knob. WASHER CARE Use a soft, damp cloth or sponge to wipe up any spills such as detergent or bleach from the outside of your washer. Clean your washer interior by mixing 1 cup (250 ml_) of chlorine bleach and enough detergent to equal twice the manufacturer's recommended amount for a normal wash load. Pour this mixture into your washer and run it through a complete cycle using hot water. Repeat this process if necessary. Remove any hard water deposits using only cleaners labeled as washer safe. Cleaning the liquid fabric softener dispenser (on some models): 1. Remove dispenser by grasping top with both hands and squeezing, while pushing upward with thumbs. 2. Rinse dispenser under warm wateb then replace it. NOTE: Some models are equipped with a liquid fabric softener dispenser. To avoid damage to the washer or clothing, do not wash clothes with the liquid fabric softener dispenser removed or add detergent or bleach to this dispenser; it is for liquid fabric softener only. V%s_ .,, ° This washer does not include water inlet hoses. A list of hoses available for separate purchase from Whirlpool Corporation is provided on the first page of this user instructions. Replace water inlet hoses after 5 years of use to reduce the risk of hose failure. Periodically inspect and replace water inlet hoses if bulges, kinks, cuts, weab or leaks are found. When replacing your water inlet hoses, mark the date of replacement on the label with a permanent marker. 4